[KERNEL][24/03/2011] Buzz OC/UV 1.22Ghz CFS+BFQ+SmartAss+TUN+EXT4+.35 ACE 1.3.8.3

1.3.8.2
-- Patched to .33
-- Fixed Rotstion sensor (fully) -- Thanks to LeeDroid --
Buzz SENSE 1.3.8.2 OCUV

1.3.8
-- Refined cpu freq table (improve speed and fix 100% useage bug)
-- Patched to .32
Buzz SENSE 1.3.8 OCUV

1.3.7
-- UTF8 and CIFS bug fixed
-- Few Gov and speed tweaks
Buzz SENSE 1.3.7 OCUV

1.3.6
-- Patched to .31
-- Droped Audio Boost To 10% (Due To Issues)
Buzz SENSE 1.3.6 OCUV

1.3.5
-- Patched up to .30
-- BMA150 rotation driver fixed
Buzz_SENSE_1.3.5_OCUV

1.3.4
-- Externel Mic Fixed
-- Permissions Fixed for rotation and prox. sensor
Buzz_SENSE_1.3.4_OCUV

1.3.3
-- Added Inspire 4G Source (Fixes Audio + Video on Inspire. Stock Inspire Libs + CSV fles needed for Inspire4G)
-- Added SLQB Memory Management
-- Cleaned Up Kernel Debuging
-- Built on 4.5.1 Toolchain (May Yield Better Praformance)
( Here Are The CSV Files from the Inspire 4G Stock Rom use them if u have audio (mic issues) ONLY FOR INSPIRE 4G Users)
Buzz_SENSE_1.3.3_OCUV

1.3.0
-- Based on the newest htc kernel src
-- compatible with all models of ace inc Inspire 4G
-- Now fully compatable with the 1.7x+ libs
-- Prox. Sensor Fixed
-- Voltage Tweaked
-- Fixed CWM updater (XBOCT )
(sound + video will not work on 1.32 libs u may have to wait for roms to be updated)
Buzz_SENSE_1.3.0_OCUV

1.2.5
-- Patched Up To .29
-- Switch back memory management
-- Speaker Boost +20%
-- OC+ kernel now can OC to 1.61Ghz
-- Some Minor Tweaks
-- Build Tweaks

1.2.4
--Not Rls

1.2.3
-- Fix Youtube Playback bug with 1.32 libs
-- Updates Interactive
-- On-demand default max is now 998mhz (not ~800muz)
-- Merge from newer HTC source (speedy)
-- Speed Improvements
-- Camera improvements

1.2.2
-- Updated Interactive + Smartass Gov to fix scaling ( Thanks To Lee )
-- Smartass tweaked a little from lees values
-- Better Prox. Sensor Dirver
-- CFQ + BFQ + Deadline are all built (you can chose which one to use BFQ default)
-- TUN driver is now a module again
( Working on a fix for the recovery pack .... for ppl with boot problems use fastboot)

1.2.1
-- Relaxed undervolt by 25mV at some clocks
-- Tweaked prox. driver to fix issues for some ppl
-- GPU tweak that allso seems to fix youtube for some ppl

1.2.0
-- Patched up to .28
-- CIFS + TUN + UTF8 modules no longer modules
Buzz_SENSE_1.2.0_OCUV

1.1.4
-- Smartass Now Uses Full Range Of frequancys
-- Fixed aCPU table to reduse crashed with interactive
-- *** IF YOU STILL GET FREEZES WITH INTERACTIVE USE A DIFF GOV ***
**** I AM WORKING ON A FIX ASAP ****
Buzz_CM_1.1.4_OCUV
Buzz_SENSE_1.1.4_OCUV

1.1.3
-- Patched Up To .27
-- Removed UV from 1.1.2 to stop reboots
Buzz_SENSE_1.1.3_OCUV Buzz_CM_1.1.3_OCUV


1.1.2
-- Added 600Mhz
-- Fixed prox. sensor issues for most
-- New toolchain (better vfp and neon)
-- More UV
-- Tweaked smartass to go over 806mhz and stay below 600mhz on sleep
Buzz_SENSE_1.1.2_OCUV Buzz_CM_1.1.2_OCUV


1.1.1
-- Fixed MAC address issue in sense based rom's
-- Fixed wifi tether issue in sense based roms's
-- Added HW3d early-suspend
-- Re added 1Ghz freq
Buzz_SENSE_1.1.1_OCUV Buzz_CM_1.1.1_OCUV


1.1.0
-- SmartAss GOV fixed
-- Interactive GOV fixed
-- BT fixed on CM/AOSP builds

1.0.9
-- Test realease

1.0.8
-- Wifi and BT fixed on sense roms
-- Split into two builds (To have working BT on both CM/Sense)
-- Smartass gov removed (unstable with CM source)
-- Updated Source to CM latest
-- IPv6 Support for Googles
-- Speed improvements over 1.0.7
Buzz_1.0.8_OCUV_CWM
Buzz_1.0.8_SENSE_OCUV

1.0.7
-- Started with Cyanogen Kernel based
-- Ported most of my changes to that
-- More UnderVolt
-- Smartass Tweaked Some More
Buzz_1.0.7_OCUV_CWM
Buzz_1.0.7_OCUV

1.0.6
-- Removed 768Mhz
-- Added 460Mhz
-- Added Interactive GOV. (Properly)
-- Fixed SmartAss GOV. (for good ... i hope)
Buzz_1.0.6_OCUV_CWM
Buzz_1.0.6_OCUV

1.0.5
-- Fixed Call Reboot Bug
Buzz_1.0.5_OCUV_CWM
Buzz_1.0.5_OCUV

1.0.4
-- Added 3D register driver
-- CFS timing tweaked
-- Voltages lowered
-- Scheduling tweaked
Buzz_1.0.4_OCUV_CWM
Buzz_1.0.4_OCUV

1.0.3
-- Non Released

1.0.2
-- Moduleised CIFS support
-- Added nls_utf8 Module
-- Added Group Sehed. (based on Control Groups -- Should improve responsivness)
Buzz_1.0.2_OCUV_CWM
Buzz_1.0.2_OCUV

1.0.1
-- Added tun.ko
-- Switched from BFS to CFS (fixed youtube with no performance hit)
Buzz_1.0.1_OCUV_CWM
Buzz_1.0.1_OCUV

1.0.0 (GOLD)
--Tweaked SmartAss governor to reduce lock ups
--Added IP:Tunneling (module)
--Added IP:GRE Tunnels over IP
--Added Full folder of compiled modules (no real diff under normal conditions)
--Now flashed with the eMMC modified zImage updater so it unpacks/repacks boot.img on the fly (hope this will stop any install errors)
Buzz_1.0.0_OCUV_CWM

0.0.9
--EXT4 Support added
--CIFS Support added
--ClockWork Recovery .zip for CM and AOSP builds

0.0.8
--More tweaking to the SmartAss governor
--Added ClockWorkMod flashable .zip
Buzz-Ace-0.0.8-BFS-BFQ-OCUV
Buzz-Ace-0.0.8-BFS-BFQ-OCUV_CWM

0.0.7
--Tweaked SmartAss governor for the ACE
--Changed Default Governor
--Added LZMA kernel compression
Buzz-Ace-0.0.7-BFS-BFQ-OCUV

0.0.6
--BFQ + CFQ support added
--Default I/O scheduler set to BFQ
--SmartAss CPU governor added
--Default governor set to Smart Ass

0.0.5
-- BFS added

0.0.4
-- Enabled Kernel Debugging (no performance gains just nice to have for devs)
-- Tweaked speeds at max stock voltage frim 1.24Ghz down to 1.22Ghz (As there where a few issues with boot looping)

0.0.3
-- Kernel version upgraded from 2.6.32.21 to 2.6.32.25 (Bug thanks to Mr. X for teaching me how to patch up the kernel )
-- Few more optimisations

0.0.2
-- Added Conservative Governor
-- Removed UserSpace Governor
-- Puhsed Up the Overclock speeds slightly to get more out of the overvolt
-- Max Speed is 1.24Ghz @ stock voltage
-- Some Build Optimisations

0.0.1
-- Inital Realease

Pré-requis:
Un Desire HD rooté et S-OFF
Superuser installé.
Android SDK tools installé sur votre PC

Pour plus de simplicité dans les lignes de commande, je vous conseille d'installer Android SDK tools à la racine de votre disque C, et de coller cmd.exe dans le sous répertoire "tools"

1. Dézippez le dossier Buzz_1.0.7_OCUV sur votre PC, par exemple sous c:/android-sdk-windows/tools/Buzz_1.0.7_OCUV

2. Connectez le Desire HD au PC.

3. Lancer une fenêtre de commande sur votre PC depuis le dossier android-sdk-windows/tools.

4. Redémarrage en mode bootloader
Dans la fenêtre de commande tapez:



5. Flashez le nouveau Kernel
Dans la fenêtre de commande tapez:



6. Redémarrez l'appareil
Dans la fenêtre de commande tapez:



7. Déplacez votre fichier bcm4329.ko depuis c:/android-sdk-windows/tools/Buzz_1.0.7_OCUV vers c:/android-sdk-windows/tools.

8. Installez le nouveau module Wifi
Dans la fenêtre de commande tapez: