[RESOLU] Quel RUU pour RADIO-5.1204.162.29 / HBOOT-1.39.0000

Si tu peux flasher le Recovery TWRP, je t ai donner 2 solutions pour flasher un ROM sans passer par la mémoire interne

Bon on y va! j'en suis la pour l'instant:

C:\fastboot>fastboot flash recovery openrecovery-twrp-2.3.3.0-endeavoru.img
sending 'recovery' (6476 KB)...
OKAY [ 0.962s]
writing 'recovery'...
(bootloader) Format partition SOS done
OKAY [ 0.566s]
finished. total time: 1.529s

.....sa s'annonce bien non? hi hi hi

...et la ca s'annonce mal:

C:\fastboot>adb push MIUI_Australia_OneX_JB_3.1.18.zip /tmp
error: device not found

C:\fastboot>adb MIUI_Australia_OneX_JB_3_1_18.zip
Android Debug Bridge version 1.0.29

-d - directs command to the only connected USB devic
e
returns an error if more than one USB device is
present.
-e - directs command to the only running emulator.
returns an error if more than one emulator is r
unning.
-s - directs command to the USB device or emulator w
ith
the given serial number. Overrides ANDROID_SERI
AL
environment variable.
-p - simple product name like 'sooner', or
a relative/absolute path to a product
out directory like 'out/target/product/sooner'.

If -p is not specified, the ANDROID_PRODUCT_OUT

environment variable is used, which must
be an absolute path.
devices - list all connected devices
connect [:] - connect to a device via TCP/IP
Port 5555 is used by default if no port number
is specified.
disconnect [[:]] - disconnect from a TCP/IP device.
Port 5555 is used by default if no port number
is specified.
Using this command with no additional arguments

will disconnect from all connected TCP/IP devic
es.

device commands:
adb push - copy file/dir to device
adb pull [] - copy file/dir from device
adb sync [ ] - copy host->device only if changed
(-l means list but don't copy)
(see 'adb help all')
adb shell - run remote shell interactively
adb shell - run remote shell command
adb emu - run emulator console command
adb logcat [ ] - View device log
adb forward - forward socket connections
forward specs are one of:
tcp:
localabstract:
localreserved:
localfilesystem:
dev:
jdwp: (remote only)
adb jdwp - list PIDs of processes hosting a JDWP transport

adb install [-l] [-r] [-s] - push this package file to the device and i
nstall it
('-l' means forward-lock the app)
('-r' means reinstall the app, keeping its data
)
('-s' means install on SD card instead of inter
nal storage)
adb uninstall [-k] - remove this app package from the device
('-k' means keep the data and cache directories
)
adb bugreport - return all information from the device
that should be included in a bug report.

adb backup [-f ] [-apk|-noapk] [-shared|-noshared] [-all] [-system|-nosy
stem] []
- write an archive of the device's data to
.
If no -f option is supplied then the data is wr
itten
to "backup.ab" in the current directory.
(-apk|-noapk enable/disable backup of the .apks
themselves
in the archive; the default is noapk.)
(-shared|-noshared enable/disable backup of the
device's
shared storage / SD card contents; the defau
lt is noshared.)
(-all means to back up all installed applicatio
ns)
(-system|-nosystem toggles whether -all automat
ically includes
system applications; the default is to inclu
de system apps)
( is the list of applications to b
e backed up. If
the -all or -shared flags are passed, then t
he package
list is optional. Applications explicitly g
iven on the
command line will be included even if -nosys
tem would
ordinarily cause them to be omitted.)

adb restore - restore device contents from the backup
archive

adb help - show this help message
adb version - show version num

scripting:
adb wait-for-device - block until device is online
adb start-server - ensure that there is a server running
adb kill-server - kill the server if it is running
adb get-state - prints: offline | bootloader | device
adb get-serialno - prints:
adb status-window - continuously print device status for a specifie
d device
adb remount - remounts the /system partition on the device re
ad-write
adb reboot [bootloader|recovery] - reboots the device, optionally into the boo
tloader or recovery program
adb reboot-bootloader - reboots the device into the bootloader
adb root - restarts the adbd daemon with root permissions
adb usb - restarts the adbd daemon listening on USB
adb tcpip - restarts the adbd daemon listening on TCP on th
e specified port
networking:
adb ppp [parameters] - Run PPP over USB.
Note: you should not automatically start a PPP connection.
refers to the tty for PPP stream. Eg. dev:/dev/omap_csmi_tty1
[parameters] - Eg. defaultroute debug dump local notty usepeerdns

adb sync notes: adb sync [ ]
can be interpreted in several ways:

- If is not specified, both /system and /data partitions will be u
pdated.

- If it is "system" or "data", only the corresponding partition
is updated.

environmental variables:
ADB_TRACE - Print debug information. A comma separated list
of the following values
1 or all, adb, sockets, packets, rwx, usb, sync
, sysdeps, transport, jdwp
ANDROID_SERIAL - The serial number to connect to. -s takes prior
ity over this if given.
ANDROID_LOG_TAGS - When used with the logcat option, only these de
bug tags are printed.

C:\fastboot>adb remount
error: device not found

En tout cas le TWRPP Fonctionne lui. Il reconnait la sd quand je vais dans backup! Il peut meme la wiper!

Dans Mount il y a 4 option a cocher:
Mount System (pas cocher)
Mount Data (pas cocher)
Unmount cache (cocher)
Unmonut SD Card (cocher)


Je fais quoi la? je peux faire quelque chose?

Je veux dire que ces option a cocher je les ai trouver comme ca en l'etat!

Je peut faire quoi now concretement car comme dit precedement je n'arrive pas a pusher le fichier zip dans la memoire du one x via mon CMD du pc

Je n'ai pas compris ce qu'il fait en disant ca:

"In my toolkit, under the extras section, press ADB Sideload a ROM. Press "Yes" when it asks you if you are in recovery. Then select the ROM you want to install. It will then sideload it to your phone and flash it."

dans ce thread: http://forum.xda-developers.com/showpost.php?p=35975366&postcount=4

il faut être dans le recovery pour les commandes ADB

alors la...vraiment pas compris

pour la commande adb push tu dois être dans TWRP et connecté au pc

PUREEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE YEEEEES!!!!!!!

CA MAAAAARCHE AVEC LE TWRP Machin chose!

Je vais faire un tuto pour ce qui sont grave en galère comme moi et qui pense que tout est perdu et qui pense que leur htc est RIP!

Merci Smoog, migascalp, doublefrag(mentation xd) et la team generation mobile pour les recherche effectué et les lien donné....
je...snifff ...je vous aime les gars....et c'est sincère ! MERCI

Je mettrai un tuto pour expliquer comment moi j'ai fait pour que ca marche! See ya!

content que tu y soit arrivé

C'est normal puisque ADB se fait depuis le pc sur un téléphone déjà lancé avec le mode débogage activé. Essaye via fastboot.

Sinon, il faut que tu trouves le moyen de Mount ta carte SD depuis le recovery TRWP (que je ne connais pas, désolé).

Pour le tuto me concernant la remise en marche et l'installation complete de ma rom stock...suivez le guide juste la: http://www.forum-generationmobiles.net/t67210-tuto-sd-corrompu-sd-vide-et-sans-rom

Bonne nouvelles ! Je savais pas tu vois que TRWP gérait l'ADB lol... J'ai d'ailleurs répondu avec 4h de retard mdr... Content que tout refonctionne, et merci pour le tuto =)