[AIDE] Problème mémoire insuffisante et crash appli en cascade

3 participants

Génération mobiles - Forum smartphones & tablettes :: Forum smartphones & tablettes HTC :: Smartphones HTC :: Autres et plus anciens smartphones HTC :: HTC HD2
:: HTC HD2 : : questions, réponses et aides

[AIDE] Problème mémoire insuffisante et crash appli en cascadeMar 11 Juin 2013 - 23:08

Bonjour,

j'ai récupéré un HD2 d'occasion, et depuis que j'installe régulièrement les roms, elles finissent toujours par avoir une instabilité plus que récurrente à plus ou moins longue échéance. Ce qui fait que je réinstalle régulièrement.

Pourtant, j'installe toujours la rom avec les paramètres recommandés.

La dernière en date, la Touchwiz en version 2.1 (http://www.forum-generationmobiles.net/t67150-nand-nativesd-jb422touchwizmod_hd2_v30).
Avec android 4.2.2, le problème a clairement été expliqué. A un moment, j'ai installé une appli, et il m'a dit que je n'avais plus d'espace. En en supprimant une, j'ai pu l'installer.

Hors, je vois (avec task manager) :
- Internal phone storage : 406 Mo/0.98 Go
- External SD card : 341 Mo/13.94 Go

Donc visiblement, "l'extension de mémoire" existe, mais n'est pas réellement utilisable.
Pourtant, dans la rom, j'ai fais tout les "wipes" et les checks de partissions.

J'en ai parlé au gars qui m'a vendu le tel, et il m'a dis qu'effectivement, lui il testait différente rom jusqu'à ce qu'une passe (je suppose, qu'il finissais sur celle qui consommait le moins en mémoire), mais il avait le problème.

Je suppose qu'il y a un paramètre moisi quelque part, mais lequel ...

Merci d'avance de votre aide.

[Déplacement au bon endroit]

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 13 Juin 2013 - 6:31

Salut, Salut,
Tu pourras trouver ici tous les outils nécessaires à la préparation de ton HD2.
Cela va, peut être te permettre de trouver où se situe ton problème et qui sait tu trouveras aussi une solution.
A bientôt. Bonne continuation

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 13 Juin 2013 - 23:06

vous pensez que je devrais réinstaller tous les composants magldr and co ?

Je vais vérifier les version. Merci.

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeVen 14 Juin 2013 - 6:05

Ben en comprenant bien le procédé tu trouveras la solution je pense!!!

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeMer 19 Juin 2013 - 20:00

Bon ben j'ai tout relu (et écouté). Mais ca correspond à la manip suit.
Donc la dans les 3 semaines, je ne puis me permettre de le réinstaller, mais je vais peut etre le tenter en clk. Vu que je ne compte pas le mettre en W7.

Par contre, je m'amuse à lire les fichier de débug qui traine dessus et un fichier contient pas mal d'erreur :

Spoiler :

[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32_tytung_jellybean_r2 (tytung@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #302 PREEMPT Sat Mar 16 15:38:22 CST 2013
[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
[    0.000000] Machine: htcleo
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Nand Boot: 1
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] allocating 33554432 bytes at c0efc000 (126fc000 physical) for sf pmem arena
[    0.000000] allocating 35651584 bytes at c2efc000 (146fc000 physical) for adsp pmem arena
[    0.000000] ram_console: found existing buffer, size 262132, start 80833
[    0.000000] console [ram0] enabled
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123888
[    0.000000] Kernel command line:
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB 231MB = 487MB total
[    0.000000] Memory: 418120KB available (5628K code, 1834K data, 404K init, 237312K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:332
[    0.000000] $$$ msm_timer_init $$$
[    0.000000] 1DIV = 00000003
[    0.000000] 2DIV = 00000003
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.32_tytung_jellybean_r2 (tytung@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #302 PREEMPT Sat Mar 16 15:38:22 CST 2013
[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f
[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
[    0.000000] Machine: htcleo
[    0.000000] Ignoring unrecognised tag 0x00000000
[    0.000000] Nand Boot: 1
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 124864
[    0.000000] free_area_init_node: node 0, pgdat c0626ac4, node_mem_map c0b26000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 65024 pages, LIFO batch:15
[    0.000000]   HighMem zone: 464 pages used for memmap
[    0.000000]   HighMem zone: 58864 pages, LIFO batch:15
[    0.000000] allocating 33554432 bytes at c0efc000 (126fc000 physical) for sf pmem arena
[    0.000000] allocating 35651584 bytes at c2efc000 (146fc000 physical) for adsp pmem arena
[    0.000000] ram_console: found existing buffer, size 262132, start 80833
[    0.000000] console [ram0] enabled
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 123888
[    0.000000] Kernel command line:
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Memory: 256MB 231MB = 487MB total
[    0.000000] Memory: 418120KB available (5628K code, 1834K data, 404K init, 237312K highmem)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] NR_IRQS:332
[    0.000000] $$$ msm_timer_init $$$
[    0.000000] 1DIV = 00000003
[    0.000000] 2DIV = 00000003
[    0.000000] Console: colour dummy device 80x30
[    0.000000] console [tty0] enabled
[    0.000000] ram_console_early_init: already initialized, bailing out
[    0.000000] Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760)
[    0.239196] Mount-cache hash table entries: 512
[    0.239562] Initializing cgroup subsys debug
[    0.239562] Initializing cgroup subsys cpuacct
[    0.239593] Initializing cgroup subsys freezer
[    0.239624] CPU: Testing write buffer coherency: ok
[    0.240966] regulator: core version 0.5
[    0.241119] NET: Registered protocol family 16
[    0.241546] htcleo_init()
[    0.242584] Max ACPU freq from efuse data is 1190400 KHz
[    1.245452] init_dex_comm: WinCE DEX init.
[    1.245483] init_dex_comm: WinCE DEX initialized.
[    1.245513] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz)
[    1.245574] PLL1 @ f8005320: MODE=00000007 L=00000028 M=00000000 N=00000001 freq=768000000 Hz (768 MHz)
[    1.245635] PLL4 @ f8005380: MODE=00000000 L=0000000f M=00000000 N=00000001 freq=288000000 Hz (288 MHz)
[    1.245697] PLL5 @ f80053a0: MODE=00000000 L=00000032 M=00000000 N=00000001 freq=960000000 Hz (960 MHz)
[    1.245727] PCB XC: 00000004
[    1.245758] AMSS version: 15.42.50.11U
[    1.246002] register analog ops = c05f7ec0
[    1.246032] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier
[    1.246063] /proc/mic_level created
[    1.346923] Init Panel
[    1.346954] panel type is 1 :board id is 1048580 : AUO
[    1.347320] htcleo_init_mmc()+
[    1.347503] htcleo_init_mmc()-
[    1.352264] bio: create slab at 0
[    1.352966] mdp_probe: initialized
[    1.353240] msm_i2c_probe
[    1.353332] msm_i2c_probe: clk_ctl 315, 400000 Hz
[    1.353637] regulator: VDCDC1: 800 <--> 1375 mV
[    1.353759] regulator: VDCDC2: 1260 mV
[    1.353851] regulator: VDCDC3: 800 <--> 3300 mV
[    1.353942] regulator: LDO1: 1000 <--> 3150 mV
[    1.354034] regulator: LDO2: 3300 mV
[    1.354980] Bluetooth: Core ver 2.15
[    1.355133] NET: Registered protocol family 31
[    1.355163] Bluetooth: HCI device and connection manager initialized
[    1.355194] Bluetooth: HCI socket layer initialized
[    1.355407] cfg80211: Using static regulatory domain info
[    1.355468] cfg80211: Regulatory domain: US
[    1.355468]     (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[    1.355529]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[    1.355560]     (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.355590]     (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.355651]     (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.355682]     (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[    1.355712]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[    1.355773] cfg80211: Calling CRDA for country: US
[    1.355957] Switching to clocksource gp_timer
[    1.356689] spi clk = 0x0
[    1.356719] spi: SPI_CONFIG=8f
[    1.356750] spi: SPI_IO_CONTROL=401
[    1.356781] spi: SPI_OPERATIONAL=85
[    1.356781] spi: SPI_ERROR_FLAGS_EN=7f
[    1.356811] spi: SPI_ERROR_FLAGS=0
[    1.356842] -msm_spi_probe()
[    1.357238] NET: Registered protocol family 2
[    1.357391] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[    1.357757] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[    1.357971] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    1.358123] TCP: Hash tables configured (established 8192 bind 8192)
[    1.358154] TCP reno registered
[    1.358337] NET: Registered protocol family 1
[    1.358551] Trying to unpack rootfs image as initramfs...
[    1.444427] Freeing initrd memory: 1172K
[    1.444610] smd_init()
[    1.444641] smd_core_init()
[    1.444702] smd_core_init() done
[    1.444732] msm_init_last_radio_log: could not retrieve SMEM_CLKREGIM_BSP
[    1.444854] smd_alloc_channel() cid=00 size=08192 'SMD_DS'
[    1.445007] smd_alloc_channel() cid=01 size=32768 'SMD_DIAG'
[    1.445098] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'
[    1.445190] smd_alloc_channel() cid=05 size=08192 'SMD_CONTROL'
[    1.445281] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'
[    1.445373] smd_alloc_channel() cid=08 size=32768 'SMD_DATA2'
[    1.445465] smd_alloc_channel() cid=09 size=32768 'SMD_DATA3'
[    1.445556] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'
[    1.445648] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'
[    1.445739] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'
[    1.445831] smd_alloc_channel() cid=15 size=08192 'SMD_DATA9'
[    1.445922] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'
[    1.446014] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'
[    1.446166] smd_alloc_v2: cid 41 does not exist
[    1.446197] smd_alloc_v1: cid 41 does not exist
[    1.446228] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'
[    1.446350] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'
[    1.446441] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'
[    1.446502] smd_alloc_v2: cid 47 does not exist
[    1.446533] smd_alloc_v1: cid 47 does not exist
[    1.446563] smd_alloc_channel() cid=48 size=08192 'SMD_DAL00'
[    1.447052] _smem_log_init: no power log or log_idx allocated, smem_log disabled
[    1.447448] RPC Probe
[    1.447662] RPC Init done
[    1.447692] SMD: ch 2 0 -> 1
[    1.447814] SMD: ch 2 1 -> 2
[    1.447845] Init amss parameters, found AMSS: 1550
[    1.448516] Acquire 'boot-time' halt_lock
[    1.448913] Registered led device: button-backlight
[    2.076416] msm_i2c msm_i2c.0: error, status 43c8 (5C)
[    2.076477] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)
[    2.076538] msm_i2c msm_i2c.0: error, status 43c8 (34)
[    2.076568] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)
[    2.077178] input: htcleo-touchscreen as /devices/virtual/input/input0
[    2.077270] leo_touch_name 0-0000: Start touchscreen htcleo-touchscreen
[    2.077728] htcleo_wifi_init: start
[    2.079223] htcleo-microp 0-0066: microp version [05][14]
[    2.082763] htcleo-microp 0-0066: Init Done
[    2.082946] capella_cm3602_probe: probe
[    2.083160] input: proximity as /devices/virtual/input/input1
[    2.083648] htcleo_backlight_probe: HTCLeo Backlight connect with microP: Probe
[    2.083770] Registered led device: lcd-backlight
[    2.085021] BTN-BCKM: Registering btn manager...
[    2.085327] Registered led device: flashlight
[    2.085357] flashlight_probe: The Flashlight Driver is ready
[    2.085479] HTC Battery Probe
[    2.085510] batt: init over voltage interrupt detection. at 1089553257 (1970-01-01 00:00:01.089522740 UTC)
[    2.085632] htc_battery_core_probe
[    2.085968] [USB] msm_hsusb_set_vbus_state: 1
[    2.086242] [HS_MGR] (htc_35mm_probe) ++++++++++++++++++++
[    2.086883] input: h2w headset as /devices/virtual/input/input2
[    2.087066] [HS_MGR] (htc_35mm_probe) --------------------
[    2.087219] [HS_GPIO] (audiojack_probe) ++++++++++++++++++++
[    2.087310] DET IRQ Registered!
[    2.087341] MIC IRQ Registered!
[    2.087371] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier
[    2.087402] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier
[    2.087463] [HS_GPIO] (audiojack_probe) --------------------
[    2.096679] highmem bounce pool size: 64 pages
[    2.096984] ashmem: initialized
[    2.098632] Btrfs loaded
[    2.098663] yaffs: yaffs built Mar 16 2013 15:34:47 Installing.
[    2.102050] alg: No test for stdrng (krng)
[    2.102142] io scheduler noop registered
[    2.102172] io scheduler anticipatory registered
[    2.102203] io scheduler deadline registered
[    2.102325] io scheduler cfq registered (default)
[    2.103027] clock-wince: pc_clk_set_rate: id=42 rate=24576000
[    2.103057] clock-wince: set mdns: 42, 24576000; bitidx=0, offset=0, ns=0
[    2.103088] set_mdns_host_clock: FIXME! Don't know how to set clock 42 - no known Md/Ns reg
[    2.103118] clock-wince: pc_clk_set_rate: id=43 rate=24576000
[    2.103149] clock-wince: set mdns: 43, 24576000; bitidx=0, offset=0, ns=0
[    2.103179] set_mdns_host_clock: FIXME! Don't know how to set clock 43 - no known Md/Ns reg
[    2.103729] msmfb_probe() installing 480 x 800 panel
[    2.115875] msmfb: pan_update in state(1)
[    2.115936] msmfb: full update starting
[    2.115966] mdp_lcdc_probe: initialized
[    2.122802] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
[    2.123260] msm_serial_hs.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART
[    2.123657] msm_serial_hs module loaded
[    2.127990] brd: module loaded
[    2.130126] loop: module loaded
[    2.130249] pmem: Initializing pmem (user-space) as cached
[    2.131103] pmem: Initializing pmem_adsp (user-space) as non-cached
[    2.131958] pmem: Initializing pmem_venc (user-space) as non-cached
[    2.132446] Android kernel panic handler initialized (bind=kpanic)
[    2.132568] spi_bma150_probe: G-sensor connect with microP: start initial, kvalue = 0x0
[    2.162628] msmfb: full update completed
[    2.162841] msmfb: turning on panel
[    2.162872] lcdc_unblank: ()
[    2.162902] auo_panel_unblank
[    2.196380] __spi_bma150_set_mode: BMA get into SLEEP mode!
[    2.198364] msm_nand: allocated dma buffer at ffa4d000, dma_addr 21400000
[    2.198486] status: e03120
[    2.198516] nandid: 5510bcad maker ad device bc
[    2.198547] Found a supported NAND device
[    2.198577] NAND Id : 0xBCAD
[    2.198577] Buswidth : 16 Bits
[    2.198608] Density : 512 MByte
[    2.198638] Pagesize : 2048 Bytes
[    2.198638] Erasesize: 131072 Bytes
[    2.198669] Oobsize : 64 Bytes
[    2.198760] msm_nand: read CFG0 = aa5400c0, CFG1 = 6744e
[    2.198791] CFG0 Old: 0xaa5400c0
[    2.198791] CFG1 Old: 0x0006744e
[    2.198822] CFG0 Init : 0xea5400c0
[    2.198852] CFG1 Init : 0x0006744e
[    2.198883] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4 num_addr_cycles=5
[    2.198974] DEV_CMD1: f00f3000
[    2.199066] <6>NAND_EBI2_ECC_BUF_CFG: 1ff
[    2.199340] Device WiFi MAC Address: macaddr=00:23:76:cc:10:84
[    2.199340]
[    2.199645] Device Bluetooth MAC Address: 00:23:76:e0:46:19
[    2.199676] #MTD# parts in atag = 6
[    2.199707] Creating 6 MTD partitions on "msm_nand":
[    2.199737] 0x000004320000-0x000004420000 : "misc"
[    2.201354] 0x000004420000-0x000004a80000 : "recovery"
[    2.208251] 0x000004a80000-0x000004f80000 : "boot"
[    2.213745] 0x000004f80000-0x00001b780000 : "system"
[    2.573150] 0x00001b780000-0x00001bf80000 : "cache"
[    2.581634] 0x00001bf80000-0x00001e800000 : "userdata"
[    2.622650] PPP generic driver version 2.4.2
[    2.622894] PPP Deflate Compression module registered
[    2.622924] PPP BSD Compression module registered
[    2.623809] PPP MPPE Compression module registered
[    2.623840] NET: Registered protocol family 24
[    2.623901] PPPoL2TP kernel driver, V1.0
[    2.623931] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[    2.625000] [USB] msm72k_probe
[    2.625030] [USB] accessory detect 0
[    2.625061] [USB] id_pin_gpio 0
[    2.625091] [USB] dock detect 0
[    2.625091] [USB] dock pin gpio 0
[    2.625152] [USB] msm72k_probe() io=d0860000, irq=58, dma=ffb4d000(212c0000)
[    2.625793] android init
[    2.625885] android_probe pdata: c05f4330
[    2.625976] android_bind
[    2.626068] android_bind_config
[    2.626098] android_usb gadget: android_usb ready
[    2.626129] [USB] msm72k_udc: registered gadget driver 'android_usb'
[    2.626220] f_adb init
[    2.626251] android_register_function adb
[    2.626281] f_mass_storage init
[    2.626281] android_register_function usb_mass_storage
[    2.626312] f_rndis init
[    2.626434] android_register_function rndis
[    2.626464] rndis_function_bind_config MAC: 00:00:00:00:00:00
[    2.626525] android_usb gadget: using random self ethernet address
[    2.626556] android_usb gadget: using random host ethernet address
[    2.626953] usb0: MAC e6:e7:86:d1:75:34
[    2.626983] usb0: HOST MAC 6e:8d:34:eb:b0:d1
[    2.627105] mass_storage_bind_config
[    2.627227] fsg_probe pdata: c05f5668
[    2.627532] [USB] hsusb: IDLE -> ONLINE
[    2.627563] [USB] lpm exit
[    2.627593] [USB] hsusb: reset controller
[    2.627655] android_usb gadget: Number of LUNs=1
[    2.627685] adb_bind_config
[    2.628051] usb: product_id=0xc02
[    2.628601] GPIO Matrix Keypad Driver: Start keypad matrix for htcleo-keypad in interrupt mode
[    2.628753] GPIO Input Driver: Start gpio inputs for htcleo-keypad in interrupt mode
[    2.628997] input: htcleo-keypad as /devices/virtual/input/input3
[    2.629638] using input dev h2w headset for key reset
[    2.629699] using input dev htcleo-keypad for key reset
[    2.630065] RTC: Init MSM RTC Clock
[    2.630493] using rtc device, msm_rtc, for alarms
[    2.630554] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0
[    2.630645] AKM8973 compass driver: init
[    2.631286] input: compass as /devices/virtual/input/input4
[    2.631713] [FLT]adp1650 Led Flash driver: init
[    2.631774] Linux video capture interface: v2.00
[    2.632385] sctrl.node 0
[    2.632415] s5k3e2fx_sensor_probe
[    2.666381] msm_hsusb_phy_reset
[    2.876373] [USB] ulpi: write 0x0c to 0x31
[    2.876403] [USB] ulpi: write 0x30 to 0x32
[    2.876434] [USB] ulpi: write 0x1d to 0x0d
[    2.876464] [USB] ulpi: write 0x1d to 0x10
[    2.876495] [USB] handle_notify_offline: notify offline
[    2.876525] [USB] msm_hsusb: enable pullup
[    2.879577] [USB] suspend
[    2.896362] [USB] not AC charger
[    2.992614] [USB] reset
[    2.992645] [USB] send connect type 1
[    2.992675] fsg_set_ums_state: 1
[    2.992675] ums: set state 1
[    2.992767] batt:online=1
[    2.994873] [USB] portchange USB_SPEED_HIGH
[    3.041473] [USB] reset
[    3.043731] [USB] portchange USB_SPEED_HIGH
[    3.067718] s5k3e2fx:kobject creat and add
[    3.067779] s5k3e2fx:sysfs_create_file
[    3.067810] s5k3e2fx:sysfs_create_file
[    3.068756] [ds2746_batt]ds2746_battery_init
[    3.068817] /proc/fast_charge created
[    3.068939] [ds2746_batt] ds2746_battery_prob
[    3.068969] batt: ds2784_notify: 0 1 at 2072982230 (1970-01-01 00:00:02.072951713 UTC)
[    3.069000] batt: charger ON (SLOW) at 2073043266 (1970-01-01 00:00:02.073012748 UTC)
[    3.069366] [D:BATT]Use 600 Kohm thermal resistance
[    3.070068] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    3.070190] Bluetooth: HCI UART driver ver 2.2
[    3.070220] Bluetooth: HCI H4 protocol initialized
[    3.070220] Bluetooth: HCILL protocol initialized
[    3.070770] [imoseyon] interactiveX enter
[    3.071807] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8
[    3.071868] mmc0: Platform slot type: N/A
[    3.071868] mmc0: 4 bit data mode enabled
[    3.071899] mmc0: 8 bit data mode disabled
[    3.071929] mmc0: MMC clock 144000 -> 64000000 Hz, PCLK 64000000 Hz
[    3.071960] mmc0: Slot eject status = 1
[    3.071990] mmc0: Power save feature enable = 1
[    3.072021] mmc0: DM non-cached buffer at ffb4f000, dma_addr 0x212fe000
[    3.072052] mmc0: DM cmd busaddr 0x212fe000, cmdptr busaddr 0x212fec00
[    3.072631] msmsdcc_platform_status_irq: 240
[    3.072662] mmc1: Slot status change detected (0 -> 1)
[    3.072814] @@@ SD power 0 @@@
[    3.073150] mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,240 dma 8
[    3.073181] mmc1: Platform slot type: SD
[    3.073211] mmc1: 4 bit data mode enabled
[    3.073211] mmc1: 8 bit data mode disabled
[    3.073242] mmc1: MMC clock 144000 -> 64000000 Hz, PCLK 64000000 Hz
[    3.073272] mmc1: Slot eject status = 0
[    3.073303] mmc1: Power save feature enable = 1
[    3.073333] mmc1: DM non-cached buffer at ffb50000, dma_addr 0x21509000
[    3.073364] mmc1: DM cmd busaddr 0x21509000, cmdptr busaddr 0x21509c00
[    3.073852] Registered led device: amber
[    3.073944] Registered led device: green
[    3.074005] microp_led_probe: succeeded
[    3.074707] logger: created 64K log 'log_main'
[    3.074859] logger: created 256K log 'log_events'
[    3.074981] logger: created 64K log 'log_radio'
[    3.075103] logger: created 64K log 'log_system'
[    3.075439] zram: num_devices not specified. Using default: 1
[    3.075469] zram: Creating 1 devices ...
[    3.076049] GACT probability NOT on
[    3.076080] Mirror/redirect action on
[    3.076110] u32 classifier
[    3.076110]     Actions configured
[    3.076141] Netfilter messages via NETLINK v0.30.
[    3.076263] nf_conntrack version 0.5.0 (6560 buckets, 26240 max)
[    3.076538] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
[    3.076568] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
[    3.076599] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[    3.076751] ctnetlink v0.93: registering with nfnetlink.
[    3.076843] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    3.076873] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    3.077301] xt_time: kernel timezone is -0000
[    3.077392] GRE over IPv4 tunneling driver
[    3.077972] ip_tables: (C) 2000-2006 Netfilter Core Team
[    3.078155] arp_tables: (C) 2002 David S. Miller
[    3.078247] TCP cubic registered
[    3.078277] Initializing XFRM netlink socket
[    3.078613] NET: Registered protocol family 10
[    3.079864] Mobile IPv6
[    3.079925] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    3.080139] IPv6 over IPv4 tunneling driver
[    3.081115] NET: Registered protocol family 17
[    3.081207] NET: Registered protocol family 15
[    3.081329] Bridge firewalling registered
[    3.081390] Bluetooth: L2CAP ver 2.14
[    3.081420] Bluetooth: L2CAP socket layer initialized
[    3.081451] Bluetooth: SCO (Voice Link) ver 0.6
[    3.081481] Bluetooth: SCO socket layer initialized
[    3.081756] Bluetooth: RFCOMM TTY layer initialized
[    3.081787] Bluetooth: RFCOMM socket layer initialized
[    3.081817] Bluetooth: RFCOMM ver 1.11
[    3.081848] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    3.081878] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    3.082061] NET: Registered protocol family 35
[    3.082214] ThumbEE CPU extension supported.
[    3.082244] wifi_nvs_init
[    3.082305] [Port list] init()
[    3.082305] [Port list] Virtual Address for port_list: [f814e538]
[    3.082336] [Port list] Physical Address for port_list: [14E538]
[    3.083129] input: lightsensor-level as /devices/virtual/input/input5
[    3.084442] [D:BATT] V=4167(6ac) I=46(75) C=1194.0/1230(10bb) id=4(a7) T=360(c7) KADC=1000
[    3.084503] [D:BATT] acr update: P=971, C=4282.
[    3.084777] [D:BATT]new RARC=971 C=1194mAh adc=4282.
[    3.084808] [D:BATT] state change(0->3), full count=0, over load count=0 [2088]
[    3.084838] [D:BATT] state change(3->5), full count=0, over load count=0 [2088]
[    3.084899] batt: ds2784_notify: 1 98 at 2088912406 (1970-01-01 00:00:02.088881889 UTC)
[    3.084960] batt: batt:power_supply_changed: battery at 2088973442 (1970-01-01 00:00:02.088973442 UTC)
[    3.084991] batt: ds2784_notify: 0 2 at 2089034477 (1970-01-01 00:00:02.089003959 UTC)
[    3.085052] batt: charger ON (FAST) at 2089064994 (1970-01-01 00:00:02.089064994 UTC)
[    3.085662] clock_late_init() disabled 17 unused clocks
[    3.085693] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1
[    3.086517] regulator_init_complete: incomplete constraints, leaving ldo2 on
[    3.086761] regulator_init_complete: incomplete constraints, leaving ldo1 on
[    3.086975] regulator_init_complete: incomplete constraints, leaving dcdc3 on
[    3.087188] regulator_init_complete: incomplete constraints, leaving dcdc2 on
[    3.087432] regulator_init_complete: incomplete constraints, leaving dcdc1 on
[    3.088500] rs30000048:00010000 rs30000048:00010000: setting system clock to 2013-04-25 11:52:59 UTC (1366890779)
[    3.089630] Freeing init memory: 404K
[    3.093658] init: skipping insecure file '/init.trace.rc'
[    3.093719] init: could not import file '/init.trace.rc' from '/init.rc'
[    3.093780] init: skipping insecure file '/init.cm.rc'
[    3.093811] init: could not import file '/init.cm.rc' from '/init.rc'
[    3.166442] @@@ SD power 17 @@@
[    3.175689] keychord: using input dev h2w headset for fevent
[    3.175750] keychord: using input dev htcleo-keypad for fevent
[    3.176025] init: cannot open '/initlogo.rle'
[    3.178405] android_usb gadget: high speed config #1: android
[    3.178710] ums: set state 1
[    3.179870] yaffs: dev is 32505859 name is "mtdblock3" rw
[    3.179901] yaffs: passed flags ""
[    3.179931] yaffs: yaffs: Attempting MTD mount of 31.3,"mtdblock3"
[    3.235870] @@@ SD power 15 @@@
[    3.342437] yaffs: yaffs_read_super: is_checkpointed 1
[    3.342681] yaffs: dev is 32505860 name is "mtdblock4" rw
[    3.342712] yaffs: passed flags ""
[    3.342742] yaffs: yaffs: Attempting MTD mount of 31.4,"mtdblock4"
[    3.343811] yaffs: yaffs_read_super: is_checkpointed 1
[    3.495147] mmc1: host does not support reading read-only switch. assuming write-enable.
[    3.495178] mmc1: new high speed SDHC card at address b368
[    3.495605] mmcblk0: mmc1:b368 USD   14.9 GiB
[    3.495849] mmcblk0: p1 p2
[    9.767944] EXT4-fs (mmcblk0p2): barriers disabled
[    9.769195] EXT4-fs (mmcblk0p2): warning: mounting fs with errors, running e2fsck is recommended
[    9.771270] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode
[    9.813110] enabling adb
[    9.813507] adb_open(adbd)
[   10.056457] acpuclk_set_vdd_level got regulator setting vdd_level 1250
[   10.069976] msm_rmnet: module license 'unspecified' taints kernel.
[   10.070007] Disabling lock debugging due to kernel taint
[   10.089996] tun: Universal TUN/TAP device driver, 1.6
[   10.090057] tun: (C) 1999-2004 Max Krasnyansky
[   10.120391] fuse init (API version 7.13)
[   10.472106] warning: `rild' uses 32-bit capabilities (legacy support in use)
[   10.638519] SMD: ch 0 0 -> 1
[   10.638702] SMD: ch 0 1 -> 2
[   10.639190] SMD: ch 5 0 -> 1
[   10.639221] -qmi_open 0
[   10.639251] -qmi_open 0
[   10.639282] -qmi_open 0
[   10.639282] SMD: ch 5 1 -> 2
[   10.639312] qmi: smd opened
[   10.639343] qmi: send: svc=00 cid=00 tid=0001 type=0022 size=0004
[   10.639373] qmi: send: tlv: 01 0001 { 01 }
[   10.639404] qmi: send: svc=00 cid=00 tid=0001 type=0022 size=0004
[   10.639434] qmi: send: tlv: 01 0001 { 01 }
[   10.639465] qmi: send: svc=00 cid=00 tid=0001 type=0022 size=0004
[   10.639495] qmi: send: tlv: 01 0001 { 01 }
[   10.640045] qmi: recv: svc=00 cid=00 tid=0001 type=0022 size=000c
[   10.640075] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[   10.640106] qmi: recv: tlv: 01 0002 { 01 01 }
[   10.640136] qmi: ctl: wds use client_id 0x01
[   10.640319] qmi: recv: svc=00 cid=00 tid=0001 type=0022 size=000c
[   10.640350] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[   10.640380] qmi: recv: tlv: 01 0002 { 01 01 }
[   10.640441] qmi: ctl: wds use client_id 0x01
[   10.640625] qmi: recv: svc=00 cid=00 tid=0001 type=0022 size=000c
[   10.640655] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[   10.640686] qmi: recv: tlv: 01 0002 { 01 01 }
[   10.640747] qmi: ctl: wds use client_id 0x01
[   10.641204] +qmi_read 256
[   11.097076] kgsl kgsl-3d0: firmware: requesting yamato_pm4.fw
[   11.131805] kgsl kgsl-3d0: firmware: requesting yamato_pfp.fw
[   11.726745] EXT4-fs error (device mmcblk0p2): ext4_mb_generate_buddy: EXT4-fs: group 1: 19228 blocks in bitmap, 19227 in gd
[   11.726898] JBD: Spotted dirty metadata buffer (dev = mmcblk0p2, blocknr = 0). There's a risk of filesystem corruption in case of system crash.
[   12.010131] htc-acoustic: open
[   12.012908] htc-acoustic: mmap
[   12.013061] htc-acoustic: ioctl
[   12.013092] htc-acoustic: ioctl: ACOUSTIC_UPDATE_ADIE called 98.
[   12.013092] htc-acoustic: ioctl: done.
[   12.017639] htc-acoustic: release
[   12.017761] Audio: voice: stop
[   12.497772] NAND boot, writing additional init commands to /dev/smd0
[   21.026062] __spi_bma150_set_mode: BMA get into NORMAL mode!
[   21.066375] __spi_bma150_set_mode: BMA get into SLEEP mode!
[   23.097229] Audio: SWITCH DEVICE 17306899, acdb 607
[   23.097259] q6audio_init
[   23.097320] audio: init: first run, init dummy control
[   23.097351] SMD: ch 43 0 -> 1
[   23.097412] SMD: ch 43 1 -> 2
[   23.207733] dal_attach: status = 0, name = 'DAL_AQ_AUD'
[   23.208709] dal_attach: status = 0, name = 'DAL_AQ_AUD'
[   23.812561] open done!
[   23.812591] SMD: ch 48 0 -> 1
[   23.812744] SMD: ch 48 1 -> 2
[   23.916839] dal_attach: status = 0, name = 'DAL00'
[   23.917175] dal_attach: status = 0, name = 'DAL00'
[   23.917205] Audio: htcleo_analog_init
[   23.932098] acdb: load 'default.acdb'
[   23.932159] misc msm_audio_ctl: firmware: requesting default.acdb
[   23.968414] Audio: htcleo_get_rx_vol 600
[   23.968780] Audio: htcleo_get_rx_vol 600
[   23.969451] Audio: htcleo_get_rx_vol 600
[   23.970184] audio_cb: s=1 e=0107605c status=20
[   23.970397] Audio: htcleo_get_rx_vol 500
[   23.970672] Audio: htcleo_get_rx_vol 500
[   23.971069] audio_cb: s=1 e=0107605c status=20
[   23.971527] Audio: htcleo_get_rx_vol 500
[   23.971801] Audio: htcleo_get_rx_vol 500
[   23.972198] audio_cb: s=1 e=0107605c status=20
[   23.972625] Audio: htcleo_get_rx_vol 500
[   23.973358] audio_cb: s=1 e=0107605c status=20
[   23.973602] Audio: htcleo_get_rx_vol 500
[   23.973876] Audio: htcleo_get_rx_vol 600
[   23.974273] audio_cb: s=1 e=0107605c status=20
[   23.974731] Audio: htcleo_get_rx_vol 600
[   23.975433] audio_cb: s=1 e=0107605c status=20
[   23.975708] Audio: htcleo_get_rx_vol 600
[   23.976409] audio_cb: s=1 e=0107605c status=20
[   23.976715] Audio: htcleo_get_rx_vol 500
[   23.977325] audio_cb: s=1 e=0107605c status=20
[   23.977539] Audio: htcleo_get_rx_vol 600
[   23.977966] Audio: htcleo_get_rx_vol 400
[   23.978576] Audio: htcleo_get_rx_vol 400
[   23.979248] Audio: htcleo_get_rx_vol 400
[   23.979553] audio_cb: s=1 e=0107605c status=20
[   23.979949] Audio: htcleo_get_rx_vol 500
[   23.980194] Audio: htcleo_get_rx_vol 500
[   23.980621] audio_cb: s=1 e=0107605c status=20
[   23.981048] audio_update_acdb (17306899, 607)
[   23.981048] table
[   23.981079] acdb: 588 bytes for device 607, rate 48000.
[   23.981079] res1 = 588
[   23.981109] res2 = 588
[   23.981109] call audio_set_table
[   23.981781] audio_cb: s=1 e=0107605c status=20
[   23.982696] audio_cb: s=1 e=0107605c status=20
[   23.983337] Audio: SWITCH DEVICE 17306898, acdb 507
[   23.983886] audio_cb: s=1 e=0107605c status=20
[   23.984832] audio_cb: s=1 e=0107605c status=20
[   23.985748] audio_cb: s=1 e=0107605c status=20
[   23.986328] Audio: htcleo_get_rx_vol -1500
[   23.986358] $$ DEV=01081513: vol is -1500
[   23.986633] audio_cb: s=1 e=0107605c status=20
[   23.987579] audio_cb: s=1 e=0107605c status=20
[   23.994537] audio_cb: s=1 e=0107605c status=20
[   23.997131] audio_cb: s=1 e=0107605c status=20
[   24.001007] audio_cb: s=1 e=0107605c status=20
[   41.389678] request_suspend_state: wakeup (3->0) at 40393660972 (2013-04-25 11:53:37.801178008 UTC)
[   41.946105] __spi_bma150_set_mode: BMA get into NORMAL mode!
[   50.078338] wifi_set_power = 1
[   50.078399] htcleo_wifi_power: 1
[   50.665130] wifi_set_carddetect = 1
[   50.665161] htcleo_wifi_set_carddetect: 1
[   50.665191] mmc0: card_present 1
[   50.665191] mmc0: Slot status change detected (0 -> 1)
[   50.665832]
[   50.665832] Dongle Host Driver, version 4.218.248.23
[   53.087799] [D:BATT] V=4189(6b5) I=105(10a) C=1195.0/1230(10bd) id=4(a8) T=360(c7) KADC=1000
[   53.087890] [D:BATT] acr update: P=971, C=4282.
[   53.088134] [D:BATT]new RARC=971 C=1194mAh adc=4282.
[   53.088165] [D:BATT] state change(5->3), full count=0, over load count=0 [1091229371]
[   53.231323] mmc0: queuing CIS tuple 0x91 length 3
[   53.231353] mmc0: new SDIO card at address 0001
[   53.234924] DHD: dongle ram size is set to 294912(orig 294912)
[   53.449188] Firmware version = wl0: Feb 11 2011 17:01:05 version 4.218.248.23
[   53.588287] wlan0: Broadcom Dongle Host Driver mac=00:23:76:cc:10:84
[   55.370910] wl_iw_set_country: set country for FR as FR rev -1 is OK
[   61.446075] Release 'boot-time' halt_lock
[   64.346435] wlan0: no IPv6 routers present
[   98.971069] request_suspend_state: sleep (0->3) at 97975051347 (2013-04-25 11:54:35.382568383 UTC)
[   98.971099] [R] early_suspend start
[   98.996124] __spi_bma150_set_mode: BMA get into SLEEP mode!
[   99.004333] lcdc_blank: ()
[   99.004394] auo_panel_blank
[   99.004394] auo_panel_cfg_setup entry
[   99.010223] msmfb: pan_update in state(4)
[   99.010223] msmfb: drawing while asleep
[   99.107025] msmfb: pan_update in state(4)
[   99.107025] msmfb: drawing while asleep
[   99.166259] auo_panel_cfg_setup exit
[   99.246337] lsensor: nothing to disable
[   99.290802] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=0 Listen=10
[   99.291870] lcdc_suspend: suspending
[   99.291931] [R] early_suspend: sync
[   99.457611]
[   99.457611] ### wl_iw_set_pno_set: info->cmd:8b0c, info->flags:0, u.data=0xbe9a7644, u.len=29
[   99.817871] dhd_pno_set set OK with PNO time=30 repeat=4 max_adjust=3
[   99.824951] msmfb: pan_update in state(4)
[   99.824981] msmfb: drawing while asleep
[ 103.128326] [D:BATT] V=4189(6b5) I=103(106) C=1195.0/1230(10bd) id=4(a8) T=360(c6) KADC=1000
[ 104.987091] active wake lock PowerManagerService
[ 104.987182] active wake lock vbus_present
[ 104.987274] wake lock qmi, expired
[ 104.987335] wake lock mmc_delayed_work, expired
[ 104.987396] wake lock wlan_rx_wake, expired
[ 104.987457] wake lock SMD_DS, expired
[ 104.987548] [R] early_suspend end
[ 109.076110] __spi_bma150_set_mode: BMA get into SLEEP mode!
[ 109.766204] wl_iw_combined_scan_set: Scan called when PNO is active
[ 125.398925] wl_iw_combined_scan_set: Scan called when PNO is active
[ 141.540588] wl_iw_combined_scan_set: Scan called when PNO is active
[ 153.138610] [D:BATT] V=4189(6b5) I=98(f9) C=1196.0/1230(10c0) id=4(a8) T=360(c7) KADC=1000
[ 157.470367] wl_iw_combined_scan_set: Scan called when PNO is active
[ 157.551544] [dma.c] msm_datamover_irq_handler id 8, result not valid4000001
[ 173.329010] wl_iw_combined_scan_set: Scan called when PNO is active
[ 188.952056] wl_iw_combined_scan_set: Scan called when PNO is active
[ 204.577545] wl_iw_combined_scan_set: Scan called when PNO is active
[ 205.607269] [D:BATT] V=4189(6b5) I=94(ee) C=1197.0/1230(10c4) id=4(a8) T=360(c8) KADC=1000
[ 220.203216] wl_iw_combined_scan_set: Scan called when PNO is active
[ 235.828735] wl_iw_combined_scan_set: Scan called when PNO is active
[ 251.799835] wl_iw_combined_scan_set: Scan called when PNO is active
[ 255.848602] [D:BATT] V=4189(6b5) I=89(e2) C=1198.0/1230(10c7) id=4(a8) T=360(ca) KADC=1000
[ 267.420715] wl_iw_combined_scan_set: Scan called when PNO is active
[ 283.045989] wl_iw_combined_scan_set: Scan called when PNO is active
[ 298.619323] wl_iw_combined_scan_set: Scan called when PNO is active
[ 306.318603] [D:BATT] V=4191(6b6) I=85(d8) C=1200.0/1230(10ca) id=4(a8) T=360(cc) KADC=1000
[ 314.247253] wl_iw_combined_scan_set: Scan called when PNO is active
[ 329.873046] wl_iw_combined_scan_set: Scan called when PNO is active
[ 345.498413] wl_iw_combined_scan_set: Scan called when PNO is active
[ 357.964782] [D:BATT] V=4191(6b6) I=81(ce) C=1201.0/1230(10cd) id=4(a8) T=350(cd) KADC=1000
[ 357.964935] batt: ds2784_notify: 1 98 at 356969008828 (2013-04-25 11:58:54.376464829 UTC)
[ 357.965118] batt: batt:power_supply_changed: battery at 356969191934 (2013-04-25 11:58:54.376647934 UTC)
[ 361.124420] wl_iw_combined_scan_set: Scan called when PNO is active
[ 376.749633] wl_iw_combined_scan_set: Scan called when PNO is active
[ 392.375335] wl_iw_combined_scan_set: Scan called when PNO is active
[ 408.001251] wl_iw_combined_scan_set: Scan called when PNO is active
[ 408.003631] [D:BATT] V=4191(6b6) I=77(c5) C=1202.0/1230(10d0) id=4(a8) T=350(ce) KADC=1000
[ 423.636291] wl_iw_combined_scan_set: Scan called when PNO is active
[ 439.261901] wl_iw_combined_scan_set: Scan called when PNO is active
[ 454.887664] wl_iw_combined_scan_set: Scan called when PNO is active
[ 458.038574] [D:BATT] V=4191(6b6) I=74(bc) C=1203.0/1230(10d3) id=4(a8) T=350(cf) KADC=1000
[ 470.513336] wl_iw_combined_scan_set: Scan called when PNO is active
[ 486.139251] wl_iw_combined_scan_set: Scan called when PNO is active
[ 501.764648] wl_iw_combined_scan_set: Scan called when PNO is active
[ 508.348571] [D:BATT] V=4191(6b6) I=71(b4) C=1204.0/1230(10d5) id=4(a8) T=350(d0) KADC=1000
[ 517.390411] wl_iw_combined_scan_set: Scan called when PNO is active
[ 533.015808] wl_iw_combined_scan_set: Scan called when PNO is active
[ 548.641601] wl_iw_combined_scan_set: Scan called when PNO is active
[ 558.848602] [D:BATT] V=4191(6b6) I=68(ac) C=1205.0/1230(10d8) id=4(a8) T=350(d1) KADC=1000
[ 564.277221] wl_iw_combined_scan_set: Scan called when PNO is active
[ 579.902648] wl_iw_combined_scan_set: Scan called when PNO is active
[ 595.528289] wl_iw_combined_scan_set: Scan called when PNO is active
[ 608.998840] [D:BATT] V=4191(6b6) I=65(a5) C=1206.0/1230(10da) id=4(a8) T=350(d2) KADC=1000
[ 608.999023] batt: ds2784_notify: 1 99 at 608003096966 (2013-04-25 12:03:05.410522449 UTC)
[ 608.999206] batt: batt:power_supply_changed: battery at 608003280071 (2013-04-25 12:03:05.410736072 UTC)
[ 611.155700] wl_iw_combined_scan_set: Scan called when PNO is active
[ 626.779479] wl_iw_combined_scan_set: Scan called when PNO is active
[ 642.405151] wl_iw_combined_scan_set: Scan called when PNO is active
[ 658.030792] wl_iw_combined_scan_set: Scan called when PNO is active
[ 659.028594] [D:BATT] V=4191(6b6) I=62(9f) C=1207.0/1230(10dc) id=4(a8) T=350(d3) KADC=1000
[ 673.657348] wl_iw_combined_scan_set: Scan called when PNO is active
[ 689.282043] wl_iw_combined_scan_set: Scan called when PNO is active
[ 704.907714] wl_iw_combined_scan_set: Scan called when PNO is active
[ 709.338562] [D:BATT] V=4191(6b6) I=59(97) C=1208.0/1230(10df) id=4(a8) T=350(d3) KADC=1000
[ 720.533569] wl_iw_combined_scan_set: Scan called when PNO is active
[ 736.158905] wl_iw_combined_scan_set: Scan called when PNO is active
[ 751.784667] wl_iw_combined_scan_set: Scan called when PNO is active
[ 759.838592] [D:BATT] V=4191(6b6) I=57(91) C=1209.0/1230(10e1) id=4(a8) T=350(d4) KADC=1000
[ 767.410003] wl_iw_combined_scan_set: Scan called when PNO is active
[ 783.036102] wl_iw_combined_scan_set: Scan called when PNO is active
[ 798.660705] wl_iw_combined_scan_set: Scan called when PNO is active
[ 810.338592] [D:BATT] V=4191(6b6) I=54(8b) C=1210.0/1230(10e3) id=4(a8) T=340(d5) KADC=1000
[ 810.338745] batt: ds2784_notify: 1 99 at 809342818641 (2013-04-25 12:06:26.750274642 UTC)
[ 810.338928] batt: batt:power_supply_changed: battery at 809343001747 (2013-04-25 12:06:26.750457748 UTC)
[ 814.286987] wl_iw_combined_scan_set: Scan called when PNO is active
[ 829.912506] wl_iw_combined_scan_set: Scan called when PNO is active
[ 845.538238] wl_iw_combined_scan_set: Scan called when PNO is active
[ 860.838562] [D:BATT] V=4191(6b6) I=52(85) C=1210.0/1230(10e5) id=4(a8) T=340(d5) KADC=1000
[ 861.163940] wl_iw_combined_scan_set: Scan called when PNO is active
[ 876.789642] wl_iw_combined_scan_set: Scan called when PNO is active
[ 892.415222] wl_iw_combined_scan_set: Scan called when PNO is active
[ 908.040802] wl_iw_combined_scan_set: Scan called when PNO is active
[ 910.998779] [D:BATT] V=4191(6b6) I=51(81) C=1211.0/1230(10e6) id=4(a8) T=340(d6) KADC=1000
[ 923.666503] wl_iw_combined_scan_set: Scan called when PNO is active
[ 939.292144] wl_iw_combined_scan_set: Scan called when PNO is active
[ 954.917419] wl_iw_combined_scan_set: Scan called when PNO is active
[ 963.591247] [D:BATT] V=4191(6b6) I=49(7c) C=1212.0/1230(10e8) id=4(a8) T=340(d6) KADC=1000
[ 963.591430] [D:BATT] state change(3->5), full count=0, over load count=0 [1092139874]
[ 970.543487] wl_iw_combined_scan_set: Scan called when PNO is active
[ 986.168640] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1001.794311] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1013.636047] [D:BATT] V=4191(6b6) I=47(78) C=1212.0/1230(10ea) id=4(a8) T=340(d7) KADC=1000
[ 1017.419860] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1033.045562] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1048.671112] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1063.848602] [D:BATT] V=4191(6b6) I=45(72) C=1213.0/1230(10ec) id=4(a8) T=340(d7) KADC=1000
[ 1063.848754] [D:BATT] acr update: P=1000, C=4373.
[ 1063.849182] [D:BATT]new RARC=1000 C=1230mAh adc=4373.
[ 1063.849273] [D:BATT] state change(5->6), full count=3, over load count=0 [1092240132]
[ 1063.849395] batt: ds2784_notify: 1 100 at 1062853469276 (2013-04-25 12:10:40.260925277 UTC)
[ 1063.849578] batt: batt:power_supply_changed: battery at 1062853652382 (2013-04-25 12:10:40.261108383 UTC)
[ 1064.306823] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1079.943481] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1095.568145] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1111.194061] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1114.348571] [D:BATT] V=4191(6b6) I=43(6d) C=1230.0/1230(1116) id=4(a8) T=340(d8) KADC=1000
[ 1126.819488] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1142.445312] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1158.070709] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1164.848663] [D:BATT] V=4191(6b6) I=41(69) C=1231.0/1230(1118) id=4(a8) T=340(d8) KADC=1000
[ 1173.696380] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1189.321929] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1204.947753] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1214.884338] [D:BATT] V=4191(6b6) I=39(65) C=1231.0/1230(1119) id=4(a8) T=340(d8) KADC=1000
[ 1220.572967] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1236.198822] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1251.824371] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1264.919372] [D:BATT] V=4191(6b6) I=38(62) C=1231.0/1230(111a) id=4(a8) T=340(d9) KADC=1000
[ 1267.449737] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1283.075531] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1298.701049] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1314.337341] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1314.944396] [D:BATT] V=4191(6b6) I=37(5f) C=1232.0/1230(111c) id=4(a8) T=340(d9) KADC=1000
[ 1329.962493] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1345.588073] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1361.213775] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1364.981475] [D:BATT] V=4191(6b6) I=36(5c) C=1232.0/1230(111d) id=4(a8) T=340(d9) KADC=1000
[ 1376.839416] wl_iw_combined_scan_set: Scan called when PNO is active
[ 1382.525421] request_suspend_state: wakeup (3->0) at 1381529372599 (2013-04-25 12:15:58.936889635 UTC)
[ 1382.525604] [R] late_resume start
[ 1382.525665] lcdc_resume: resuming
[ 1382.525726] auo_panel_init
[ 1382.525787] msmfb: ready, waiting for full update
[ 1382.536254] __spi_bma150_set_mode: BMA get into NORMAL mode!
[ 1382.550903] msmfb: pan_update in state(1)
[ 1382.550994] msmfb: full update starting
[ 1382.569396] msmfb: pan_update in state(3)
[ 1382.578155] msmfb: full update completed
[ 1382.578216] msmfb: turning on panel
[ 1382.578247] lcdc_unblank: ()
[ 1382.578247] auo_panel_unblank
[ 1382.746063] auo_panel_cfg_setup entry
[ 1382.746093] auo_panel_cfg_setup Board id: 1048580
[ 1383.066436] msm_i2c msm_i2c.0: error, status 63c8 (5C)
[ 1383.066497] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)
[ 1383.066558] msm_i2c msm_i2c.0: error, status 63c8 (34)
[ 1383.066589] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)
[ 1383.066986] [R] late_resume end
[ 1383.329406] auo_panel_cfg_setup exit
[ 1391.859588] acdb: load 'default_france.acdb'
[ 1391.859649] misc msm_audio_ctl: firmware: requesting default_france.acdb
[ 1391.863983] acdb: load 'default.acdb' failed...
[ 1395.035491] wl_iw_set_country: set country for FR as FR rev -1 is OK
[ 1401.893768] RPC_TIME_TOD_SET_APPS_BASES:
[ 1401.893768]     tick = 46402268
[ 1401.893768]     stamp = 55098859835097088
[ 1403.821014] qmi: send: svc=01 cid=01 tid=0001 type=0020 size=000b
[ 1403.821075] qmi: send: tlv: 14 0004 { 66 72 65 65 }
[ 1403.821105] qmi: send: tlv: 16 0001 { 30 }
[ 1404.608764] qmi: recv: svc=01 cid=01 tid=0001 type=0020 size=000e
[ 1404.608825] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[ 1404.608856] qmi: recv: tlv: 01 0004 { 78 f2 18 02 }
[ 1404.608917] wds: 0020 @ 01
[ 1404.608917] qmi: wds: got handle 0x0218f278
[ 1404.609100] qmi: recv: svc=01 cid=ff tid=0000 type=0022 size=0005
[ 1404.609130] qmi: recv: tlv: 01 0002 { 02 00 }
[ 1404.609161] wds: 0022 @ ff
[ 1404.609191] qmi: wds: CONNECTED
[ 1404.609191] qmi: send: svc=01 cid=01 tid=0003 type=002d size=0000
[ 1404.609252] -qmi_read 17
[ 1404.609405] +qmi_read 256
[ 1404.610229] qmi: recv: svc=01 cid=01 tid=0003 type=002d size=0064
[ 1404.610290] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[ 1404.610321] qmi: recv: tlv: 1e 0004 { 2a ab a2 0a }
[ 1404.610351] qmi: recv: tlv: 15 0004 { f0 28 1b d4 }
[ 1404.610382] qmi: recv: tlv: 16 0004 { f1 28 1b d4 }
[ 1404.610443] qmi: recv: tlv: 20 0004 { 29 ab a2 0a }
[ 1404.610473] qmi: recv: tlv: 21 0004 { fc ff ff ff }
[ 1404.610504] qmi: recv: tlv: 1f 0002 { 00 01 }
[ 1404.610534] qmi: recv: tlv: 10 0008 { 70 72 6f 66 69 6c 65 31 }
[ 1404.610595] qmi: recv: tlv: 11 0001 { 00 }
[ 1404.610595] qmi: recv: tlv: 14 0004 { 66 72 65 65 }
[ 1404.610656] qmi: recv: tlv: 1d 0001 { 00 }
[ 1404.610656] qmi: recv: tlv: 19 0014 { 03 00 00 00 02 00 00 00 03 00 00 00 06 00 00 00 1f 00 00 00 }
[ 1404.610778] qmi: recv: tlv: 22 0001 { 00 }
[ 1404.610778] wds: 002d @ 01
[ 1404.610809] qmi: got network profile
[ 1404.610839] -qmi_read 115
[ 1404.611175] rmnet_open()
[ 1404.611206] SMD: ch 11 0 -> 1
[ 1404.611419] SMD: ch 11 1 -> 2
[ 1404.613189] +qmi_read 256
[ 1415.086212] rmnet0: no IPv6 routers present
[ 1420.925262] [D:BATT] V=4177(6b0) I=-2(fffffffa) C=1233.0/1230(111e) id=4(a8) T=340(d6) KADC=1000
[ 1449.297180] select 1402 (enmod.lockclock), adj 15, size 5914, to kill
[ 1449.297241] select 1564 (d.process.acore), adj 15, size 19051, to kill
[ 1449.297302] send sigkill to 1564 (d.process.acore), adj 15, size 19051
[ 1451.734130] select 1402 (enmod.lockclock), adj 15, size 5914, to kill
[ 1451.734191] select 1646 (viders.calendar), adj 15, size 6055, to kill
[ 1451.734222] select 1981 (d.apps.uploader), adj 15, size 6140, to kill
[ 1451.734252] select 2017 (d.process.media), adj 15, size 6243, to kill
[ 1451.734283] select 2039 (ile.android.vvm), adj 15, size 6332, to kill
[ 1451.734344] send sigkill to 2039 (ile.android.vvm), adj 15, size 6332
[ 1451.838928] select 1402 (enmod.lockclock), adj 15, size 5903, to kill
[ 1451.838958] select 1646 (viders.calendar), adj 15, size 6044, to kill
[ 1451.838989] select 1981 (d.apps.uploader), adj 15, size 6129, to kill
[ 1451.839019] select 2017 (d.process.media), adj 15, size 6232, to kill
[ 1451.839050] send sigkill to 2017 (d.process.media), adj 15, size 6232
[ 1452.012145] select 1402 (enmod.lockclock), adj 15, size 5903, to kill
[ 1452.012207] select 1646 (viders.calendar), adj 15, size 6044, to kill
[ 1452.012237] select 1981 (d.apps.uploader), adj 15, size 6129, to kill
[ 1452.012268] send sigkill to 1981 (d.apps.uploader), adj 15, size 6129
[ 1463.072265] EXT4-fs (dm-0): mounted filesystem without journal
[ 1466.985748] EXT4-fs (dm-0): mounted filesystem without journal
[ 1470.928436] [D:BATT] V=4191(6b6) I=35(5b) C=1233.0/1230(111f) id=4(a8) T=350(d0) KADC=1000
[ 1470.928619] batt: ds2784_notify: 1 100 at 1469932692937 (2013-04-25 12:17:28.042132806 UTC)
[ 1470.928802] batt: batt:power_supply_changed: battery at 1469932876042 (2013-04-25 12:17:28.042315912 UTC)
[ 1499.597900] mmc1: Data timeout
[ 1499.598022] mmc1: DMA channel flushed (0x80000004)
[ 1499.598052] Flush data: 0000c003 21509000 00000000 00400040 00370035 00008003
[ 1499.741607] mmcblk0: error -110 transferring data, sector 29260544, nr 16, card status 0xc00
[ 1499.741699] mmc1: Data timeout
[ 1499.741729] end_request: I/O error, dev mmcblk0, sector 29260544
[ 1499.741790] end_request: I/O error, dev mmcblk0, sector 29260552
[ 1499.741882] Aborting journal on device mmcblk0p2-8.
[ 1506.336669] EXT4-fs error (device mmcblk0p2): ext4_journal_start_sb: Detected aborted journal
[ 1506.336944] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
[ 1519.655273] request_suspend_state: sleep (0->3) at 1518659255461 (2013-04-25 12:18:16.768786883 UTC)
[ 1519.655303] [R] early_suspend start
[ 1519.676086] __spi_bma150_set_mode: BMA get into SLEEP mode!
[ 1519.694793] msmfb: pan_update in state(4)
[ 1519.694793] msmfb: drawing while asleep
[ 1519.703125] lcdc_blank: ()
[ 1519.703155] auo_panel_blank
[ 1519.703155] auo_panel_cfg_setup entry
[ 1519.726135] __spi_bma150_set_mode: BMA get into SLEEP mode!
[ 1519.866088] auo_panel_cfg_setup exit
[ 1520.001068]
[ 1520.001098] ### wl_iw_set_pno_set: info->cmd:8b0c, info->flags:0, u.data=0xbe9a7644, u.len=29
[ 1520.007904] wlan0: dhdcdc_set_ioctl: unexpected request id 478 (expected 479)
[ 1520.019592] dhd_get_dtim_skip bcn_li_dtim=3 DTIM=0 Listen=10
[ 1520.024963] lcdc_suspend: suspending
[ 1520.025024] [R] early_suspend: sync
[ 1520.116119] active wake lock wlan_wake
[ 1520.116180] active wake lock PowerManagerService.Broadcasts
[ 1520.116210] active wake lock PowerManagerService
[ 1520.116210] active wake lock vbus_present
[ 1520.116241] wake lock mmc_delayed_work, expired
[ 1520.116241] wake lock qmi, expired
[ 1520.116271] wake lock SMD_DATA5, expired
[ 1520.116271] wake lock SMD_DS, expired
[ 1520.116302] wake lock wlan_rx_wake, expired
[ 1520.116333] [R] early_suspend end
[ 1521.274414] msmfb: pan_update in state(4)
[ 1521.274444] msmfb: drawing while asleep
[ 1521.371490] msmfb: pan_update in state(4)
[ 1521.371490] msmfb: drawing while asleep
[ 1521.468353] msmfb: pan_update in state(4)
[ 1521.468353] msmfb: drawing while asleep
[ 1521.569183] msmfb: pan_update in state(4)
[ 1521.569183] msmfb: drawing while asleep
[ 1522.527404] request_suspend_state: wakeup (3->0) at 1521531386812 (2013-04-25 12:18:19.640918234 UTC)
[ 1522.527465] [R] late_resume start
[ 1522.527526] lcdc_resume: resuming
[ 1522.527526] auo_panel_init
[ 1522.527587] msmfb: ready, waiting for full update
[ 1522.536102] __spi_bma150_set_mode: BMA get into NORMAL mode!
[ 1522.566131] msmfb: pan_update in state(1)
[ 1522.566131] msmfb: full update starting
[ 1522.597412] msmfb: full update completed
[ 1522.597503] msmfb: turning on panel
[ 1522.597534] lcdc_unblank: ()
[ 1522.597564] auo_panel_unblank
[ 1522.766052] auo_panel_cfg_setup entry
[ 1522.766082] auo_panel_cfg_setup Board id: 1048580
[ 1522.899261] auo_panel_cfg_setup exit
[ 1523.066070] dhd_bus_rxctl: resumed on timeout
[ 1523.086120] msm_i2c msm_i2c.0: error, status 63c8 (5C)
[ 1523.086181] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)
[ 1523.086242] msm_i2c msm_i2c.0: error, status 43c8 (34)
[ 1523.086273] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)
[ 1523.086669] [R] late_resume end
[ 1523.299224] dhd_pno_clean failed code -110
[ 1523.299255] dhd_pno_set failed error=-110
[ 1524.702056] [D:BATT] V=4184(6b3) I=27(45) C=1234.0/1230(1120) id=4(a8) T=360(cb) KADC=1000
[ 1524.702148] batt: ds2784_notify: 1 100 at 1523706191503 (2013-04-25 12:18:21.815692407 UTC)
[ 1524.702209] batt: batt:power_supply_changed: battery at 1523706222020 (2013-04-25 12:18:21.815753442 UTC)
[ 1582.747070] [D:BATT] V=4191(6b6) I=37(60) C=1234.0/1230(1121) id=4(a8) T=360(c5) KADC=1000
[ 1613.994873] qmi: send: svc=01 cid=01 tid=0005 type=0021 size=0007
[ 1613.994873] qmi: send: tlv: 01 0004 { 78 f2 18 02 }
[ 1615.533355] qmi: recv: svc=01 cid=01 tid=0005 type=0021 size=0007
[ 1615.533386] qmi: recv: tlv: 02 0004 { 00 00 00 00 }
[ 1615.533447] wds: 0021 @ 01
[ 1615.533477] qmi: wds: network stopped
[ 1615.533508] -qmi_read 17
[ 1615.533660] rmnet_stop()
[ 1615.534423] +qmi_read 256
[ 1615.534942] qmi: recv: svc=01 cid=ff tid=0000 type=0022 size=000a
[ 1615.535003] qmi: recv: tlv: 01 0002 { 01 00 }
[ 1615.535034] qmi: recv: tlv: 10 0002 { 02 00 }
[ 1615.535064] wds: 0022 @ ff
[ 1615.535095] qmi: wds: DISCONNECTED
[ 1615.535125] -qmi_read 17
[ 1615.535186] +qmi_read 256
[ 1619.606140] SysRq : Emergency Remount R/O
[ 1619.656066] Emergency Remount complete
[ 1619.707336] msmfb_shutdown
[ 1619.707366] lcdc_blank: ()
[ 1619.707397] auo_panel_blank
[ 1619.707427] auo_panel_cfg_setup entry
[ 1619.866424] auo_panel_cfg_setup exit
[ 1619.946136] lcdc_shutdown: ()
[ 1619.946716] Restarting system.
[ 1619.946746]
[ 1619.946746] Restarting Linux version 2.6.32_tytung_jellybean_r2 (tytung@ubuntu) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-188) ) #302 PREEMPT Sat Mar 16 15:38:22 CST 2013
[ 1619.946777]
[ 1619.946929] msm_restart saving reason 776655aa @

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeMer 19 Juin 2013 - 20:36

Refais l'install de La Touchwizz en faisant tous les wipes auparavant.

Que ce soit en magldr ou clk cela ne pas être l'origine de tes soucis...

Au besoin tu pourrais éventuellement flasher(re) l'initrd_patcher pour être sur que la gestion de la partition ext se fasse bien...

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 20 Juin 2013 - 16:31

[AIDE] Problème mémoire insuffisante et crash appli en cascade 2325459160

Et une fois que ta rom fonctionne correctement, avec tes applications installées et paramétrées, penses à aller dans le recovery faire une sauvegarde complète, un peu comme sous Windows de ton pc..Car comme tu le dis, moi aussi j'ai été confronté souvent à ce problème d'instabilité après plusieurs semaines d'utilisation...Très certainement dues aux mémoires saturées par les cookies, l'accumulation de données et le cache (des applications)...Le simple fait de faire un nettoyage cache et dalvik-cache peut résoudre le problème, quelque fois une fix-permission...Mais si tout ça ne fonctionne plus, c'est là que tu pourras utiliser ta fameuse sauvegarde, en la restaurant depuis le recovery...
Personnellement, si tu dois tout réinstaller, je te conseille de passer par cLK, tu ne seras pas déçu Wink

Actuellement je tourne sur le dernière EnergyROM du 24 juillet 2012, et si tu aimes le Sense, elle est vraiment pas mal...Mais je suppose que tu connais déjà ? Sinon, ma préférée reste la "Dorimanx-Rom-3.1.9-Nightly-277-All-in-One.zip" pour sa fluidité, fonctionnalité et sa bonne autonomie...

++

did.

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 20 Juin 2013 - 21:54

merci de tes avis sur les roms dg57. J'avous avoir un coup de coeur pour la TouchWiz avec android 4.2.2
Après je demande qu'a voir ^^

J'irais la regarder.

Je vais tenter une réinstall (du coup, pt'etre en clk ^^). Merci.
POur faire un "initrd_patcher" ont fait comment ?

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 20 Juin 2013 - 22:40

Pour l'initrd_patcher tu peux le trouver dans cet excellent Tuto...

Il se flashe dans le recovery comme une rom smile

Re: [AIDE] Problème mémoire insuffisante et crash appli en cascade

Sujets similaires

[RESOLU] Problème de mémoire insuffisante
[AIDE] mémoire insuffisante
[AIDE] mémoire insuffisante sur htc hd2
[AIDE] mémoire interne insuffisante
[AIDE] memoire insuffisante blocage telephone

Sauter vers:

Permission de ce forum:

Vous ne pouvez pas répondre aux sujets dans ce forum

Se connecter pour répondre

Forum Android pour smartphones & tablettes Asus, HTC, Huawei, Honor, LG, Nokia, OnePlus, Samsung, Sony, Xiaomi... Retrouvez applications, astuces, aide, jeux, tutos,...

[AIDE] Problème mémoire insuffisante et crash appli en cascade

description[AIDE] Problème mémoire insuffisante et crash appli en cascadeMar 11 Juin 2013 - 23:08

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 13 Juin 2013 - 6:31

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 13 Juin 2013 - 23:06

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeVen 14 Juin 2013 - 6:05

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeMer 19 Juin 2013 - 20:00

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeMer 19 Juin 2013 - 20:36

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 20 Juin 2013 - 16:31

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 20 Juin 2013 - 21:54

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascadeJeu 20 Juin 2013 - 22:40

descriptionRe: [AIDE] Problème mémoire insuffisante et crash appli en cascade