Normal/WWE editions (for base 1.82/1.90/1.91/1.92/1.95/1.96, non-sprint / verizon-locked-to-rom-1.82 installer)
1.7.5 - November 17 - 2016
-Updating both normal and Sprint versions with patches including:
-dirtycow CVE vulnerability fix ( credits to Linus ) CVE-2016-5195
-proc: Remove verifiedbootstate flag from /proc/cmdline
-kgsl/mdss: use kthread instead of workqueues, thanks go to flar2 for gathering these in EX

1.7.4 - November 12 - 2016
- Updating to 1.96 official sources:
-Mostly some vulnerability/memcpy fixes in Network/IPv4/IPv6/sound subsyste
-Still HTC missed out on some QCOM vulnerability patches (???), but don't worry, CleanSlate already had/has them.

1.7.3 - September 13 - 2016
- Fixing QCOM security issues:
--- CVE-2016-5342 Buffer overflow vulnerability in wcnss_wlan_write
--- CVE-2016-5343 Multiple memory corruption issues in write operation in QDSP6v2 Voice Service driver
- Removing Analogue Headphone Gain feature - working like stock again, removing so that low impedance headphone static noise issue is resolved

1.7.2 - August 28 - 2016
- Fixing QCOM security issues:
-- CVE-2016-3866 Buffer Overflow Vulnerability in msm_compr_ioctl_shared
-- CVE-2016-5344 Integer Overflow in MDSS Driver
-- CVE-2016-3859 Arbitrary write vulnerability in msm_isp_send_hw_cmd() when processing VIDIOC_MSM_VFE_REG_CFG ioctl command
- BLN fix:
--- accidental switch off button backlight with Always on option in normal Sense button backlight Settings

1.7.0 - August 26 - 2016
- Update to official HTCDev 1.91.617.1 kernel sources retaining security patches and features. Main changes by HTC:
---binder - android locking optimizations
---camera optimizations, actuator patches, sensor driver patches
---general security patches here and there, overflow fixing patches
---htc charger: optimizations, screen off handling
---ext4 patches
---kernel core: timer patches
- Default Button Light Notification brightness level pumped up - as noticed by a few users, the blink light was much less intense than possible maximum. Now it's brighter, and also with sysfs settings possibility - sysfs: /sys/class/leds/button-backlight/bln_light_level 0-20
- WLAN wakelock timeout reduction - credits to @buckmarble - set to a default reduction of division by 6, you don't need to tweak it, but possible through sysfs - sysfs: /sys/module/bcmdhd/parameters/wlrx_divide and /sys/module/bcmdhd/parameters/wlctrl_divide
- Sound Control: Headphone Analog Gain - credits to @flar2 - set to off, setting possible through sysfs - sysfs: /sys/kernel/sound_control/headphone_pa_gain

1.6.0 - August 22 - 2016
- DriveDroid support, a.k.a ReadWrite/RO-CDROM/USB mounting of ISO images
-- DriveDroid. A few possibilities: You can create your own empty ISO images on your phone with DD just to mount them ReadWrite as USB Mass Storage units on your PC (beware: you cannot mount these images onto your phone from this app tho', only to your PC! As usual you still need to use MTP file transfer to access the internal storage if you want to copy files accessible by the phone too). Also You can download a big heap of Operating system ISO images to boot them from the phone on your PC. Read more here: https://play.google.com/store/apps/details?id=com.softwarebakery.drivedroid&hl=en Thanks to @GRIDSpawn for bringing this topic up to my attention

1.5.6 - August 19 - 2016
- Button Light Notification fix: fixing use case where On-Screen Navbar buttons are used in Custom roms like ICE 10 or LeeDroid, BLN was accidentally left on blinking when screen was switched on. This version fixes this issue
- Other minor fixes related to how Fingerprint Home button remapping mode works in some rare use cases should work better, work as in stock kernel

1.5.5 - aug 17 2016
- LED mods fix: fixing Intensity set to 20 with stock notification and charge LED mode will result in LED off - Thanks @ibrokemypie for reporting it        

1.5.4 - aug 16 2016
- Sound Control for Headphone jack: all credits and thanks to @flar2
- LED mods fix: fixing LED intensity when Gradient charging LED color is off, and stock charging LED intensity is set appropriately. Before the fix, the LED intensity setting was not applied on stock charging LED mode.

1.5.3 - August 13 - 2016
- Security fix: CVE-2016-2059

1.5.2 - August 10 - 2016
- Adrenoboost version 2.2 - smooth gaming, battery friendly, - further enhancements:
        - Corrected leveling mechanism to achieve a bit more agile freq switching on higher levels, fixing first boot level value calculation, and alto the idle (out of governor control) freq drop problem
        - finally settling with 133MHz init/idle freq, does not affect real-life performance, slightly better battery life
- Security fixes: CVE-2016-2504, CVE-2016-2503
- LED mod: LED fully off - -- if intensity set to 20 on the 0 to 20 scale will turn of RGB LED fully. Use Tweak apps to achieve that, set to 20, LED will stop lighting

1.5.1 - August 06 - 2016
- Adrenoboost version 2.1 - smooth gaming, battery friendly, - further enhancements:
         - Low demand situation like 2D will stay on battery friendly frequencies on each Adrenoboost level: battery friendly video playback and browsing even meanwhile you leave the adrenoboost high levels on 2 or 3. (Level 1 remains the same battery friendly as before, so don't need to worry about this feature on default level: good gaming, and nice battery life)
         - More aggressive ramp up on Level 3 GPU boost level at high demand

1.5.0 - August 04 - 2016
- Adrenoboost version 2 - smooth gaming, battery friendly, fixing GPU handling of stock HTC kernel -- battery friendly conservative governor. Three levels (1 is the most battery friendly), and off state. ICE configurator / LeeDroid settings should handle it soon (thanks @flar2 for the original idea)
- Fastcharge for USB 2.0 -- PC's, Laptop's will now be able to charge your phone (bumping 0.5A draw to 1A from USB2.0 port, retaining the data connection all working)

1.4.0 - July 29 - 2016
- Gradient battery charging led turning from amber to green based on battery level percentage, then at full charge it starts to smoothly change from full bright green to golden and the back to full green cycling, signalling 100% battery for easy spotting
- Fading notification led fading/pulsating type notification LED blinking
- Upper grill RGB LED light brightness level you can lower the brightness level of the upper grill RGB led now (use ICE configurator/LeeDroid tweaks latest version to config!)
- Backlight dimmer not on by default, check second post for sysfs paths for your scripts, or use ICE configurator/LeeDroid tweaker - Full credits to @flar2
- NTFS/ReadWrite
- Sony HID input device support (thanks @flar2)
- Supporting 1.30 and 1.5x, 1.80, 1.90 bases. Tested on EU 1.30/tw 1.55 bases/1.80 EU basses.
- Supporting Stock Verizon 1.19 base in a separate download
- Hacked texfat/modcrypto loading for all ROM bases to work with sdcard
- doesn't modify system partition. Androidpay should work on phones with stock system image
- Compatible with LeeDroid and ICE 10 ROM kernel tweak settings. Thx @baadnewz and @LeeDroid
- compatible with ViperROM
- For Sprint 1.80 ROMs separate download

1.3.1 - July 20 - 2016
- Button Light Notification (see video below, only works if Ambient Display is not active)
- Notification double vibration pattern detection based Button Light Notifications (works now even while charging!)
- "Endless BLN while charging" + "Notification vibration length based two types of blinking pattern for BLN" features
- KCAL Color Control (see video below, credit to @savoca)
- Fingerprint doubletap sleep (see video below)
- Backlight dimmer from 1.2.1 (not on by default, check second post for sysfs paths for your scripts) Full credits to @flar2
- NTFS/ReadWrite
- Sony HID input device support (thanks @flar2)
- Supporting 1.30 and 1.5x, 1.80 bases. Tested on EU 1.30/tw 1.55 bases/1.80 EU basses.
- Supporting Stock Verizon 1.19 base in a separate download
- Hacked texfat/modcrypto loading for all ROM bases to work with sdcard
- doesn't modify system partition. Androidpay should work on phones with stock system image
- Compatible with LeeDroid and ICE 10 ROM kernel tweak settings. Thx @baadnewz and @LeeDroid
- compatible with ViperROM
- For Sprint 1.80 ROMs separate download

1.3.0 - July 17 - 2016
Adding full KCal Color Control interface - ported to HTC 10 mdss/mdp driver by tbalden (original patches by @savoca / @faux123 , ported from @flar2 's m9 sources)
--- description of sysfs endpoints and the Color Control app download URL: http://forum.xda-developers.com/andr...ntrol-t3032080

KCal Color Control on HTC 10
Color Control APK here: http://forum.xda-developers.com/andr...ntrol-t3032080

Doubletap Fingerprint scanner to sleep:

Requirements
- Unlocked HTC 10 with TWRP
-- Tested only on European HTC 10 model. Should work on Emea/taiwan and US GSM and Verizon and unlocked dev phones. Please report back!
- BACKUP: make sure you backed up your original Boot partition in TWRP, before installing this! Installer since 0.4 only modifies BOOT (kernel zImage)
- INSTALL: Side load, or install the zip from your sdcard through TWRP

1.2.5 - July 13 - 2016
Button Light Notification bugfixes
- re-trigger BLN blinking for each time a notification starts, even when BLN number is set to unlimited (0), because now BLN has two different light patterns
- fixing notification turning-off accidentally for calendar events when multiple events/notifications trigger BLN

1.2.4 - July 06 - 2016
Button Light Notification:
-"Endless blinking while Charging" functionality added (if phone's on charge notification vibration triggered blinking won't stop)
-effectively helping out with the functionality of the green/amber notification led, while those are not blinking in charging mode. You won't miss notifications while charging: it won't stop after a while like it was stopping in previous version if it's in charging.
-"Vibrating notification length based Button light notification patterns" functionality added:
-short notifications (e.g. facebook, calendar, where one vibration is below or equal to 0.2 sec) will blink the buttons with a quicker, double blink pattern
-normal/long notifications will remain with the button blinking pattern as it was in the previous versions

1.2.0 - June 22 - 2016
- Added Sprint compatibility files (please report back! Thanks go to @~clumsy~
- Updated to super stable official kernel source base 1.80.401.1 -- with CleanSlate features
-- Camera ISP / focus fixes
-- WiFI driver updates
-- charger updates
-- SPI driver optimizations
-- usb port fixes
-- core kernel scheduler optimizations
-- USB alsa minor fix

17-june-2016
- Adding flashable downgrade patch to let older kernel base work with 1.80 ROM bases (to be usable with the base version used by most of the current custom roms and official WWE HTC rom base version )
1.1.0 - 6-june-2016
- Updated 1.53 to 1.55 htcdev kernel sources, a few changes:
-- minor fair scheduler update
-- htc charger additions
-- htc's own zygote (android's root) process protection implementation

1.0.2 - 5-june-2016
- Fingerprint Doubletap Sleep : shorter minimum wait time settable for doubletaps, 0 value now means even less so single Home button pressing can be handled faster, less lag
(use ROM's tweak app to select lower values, lowest minimum is now sysfs speed set to 0 == 72msec latency, this is barely noticeable on single home button press, the default value is 2 == 90 msec, not much more but a bit more comfortable)
- building non-proprietary modules into kernel so it can be used even on bases where they cannot load from system partition.

1.0.1 - 5-june-2016
- Fingerprint Doubletap Sleep : shorter default wait time for doubletaps, so single Home button pressing can be handled faster, less lag
- Fingerprint Doubletap Sleep : addition of sysfs configration points for tweak apps
-- /sys/fpf/fpf_dt_wait_period Values: min 0 max 5 , (default value without tweak app setting is 1 -> 90msec)
----- 0 meaning smallest time to wait for doubletap: 81msec,
----- 1 meaning 90msec, .....
----- 5 meaning 126msec
Each +1 means 9 more milisecs of waiting period for doubletap event. If that time passed, it will be interpreted as Single press on Home button.

1.0 - 4-june-2016
- Update to 1.53 kernel sources from HTCDev
- Button Light Notification new sysfs provided for Tweak apps: /sys/class/leds/button-backlight/bln_speed -- Values from 0 to 9 possible,
--- 0 slowest speed blinking, 9 quickest (ranging from 5 sec to ~1 sec speed)
--- The slower it is, the more dark period it has.
- Button Light Notification bug fixes
- added vidc patch (for video playback power consumption optimization), thanks go to @flar2
- Support for rom base below 1.30 not possible (if you need it, use cleanslate v0.6)

Nouvelle version du Kernel cleanSlate v0.6
Changelog:
- correction forcée de l'écran lorsqu'une fausse empreinte digitale est lue trop de fois.
--- (Présente toujours la question, lorsque vous faites cela avec une pression rapide sur l'écran, l'écran est allumé, et d'aller avec les empreintes digitales, et le code PIN devrait apparaître mais il ne pourra pas apparaître. Il est présent sur l'autre noyau, ainsi que mes tests le montrent, en raison des codes et d'une approche partagée)
- Fixer question "sans déverrouillage de l'écran sonore"
- A ajouté à la configuration du système de fichiers de paramètres sysfs pour peaufiner les applications utiliser plus tard:
- / sys / fpf / fpf Valeur 1 -> Travaux simple bouton HOME d'entrée, la valeur 2 (par défaut) - travail avec DoubleTap sommeil
- / Sys / fpf / vib_strength -> set à 0 pour avoir aucune vibration, réglez environ à 20 pour la normale
- / Sys / class / Leds / bouton rétro-éclairage / bln Valeur 1 -> on, la valeur 0 -> off

0.5.1 - 30-may-2016
- fixing a null pointer reference in a newly introduced logging, doh' (resolving a very rare kernel reboot issue, please update if you're on 0.5!)

0.5 - 30-may-2016
- Fingerprint Double Tap Sleep finalized, working without issues, fully reliable

0.4alpha2 - 30-may-2016
- FingerPrint DoublTap Sleep original feature and impl by tbalden , incented by my own kernel for m9+
- adding haptic feedback on first press of the Fingerprint scanner so firmer feedback for intuitivity
- added the 'hack' that allows loading of Texfat (sdcard) and encryption modules which are on different ROM bases (so SDCard issues should be unified gone)

0.3 - 24-may-2016
- fine tuned Button Light Notification flash pace, more unlighted period, and smoother lights fade transition
- two types of installers (one without modules for 1.21/1.30, one with modules for 1.19 verizon stock rom)

0.2 - 23-may-2016
- added all proprietary and non-proprietary modules to installer to make sure it works on 1.19 VZW base as well (NOW MODIFIES SYSTEM image as well to push modules, mounting it as RW once!)
- NTFS/RW support
- TCP Congestion - advanced settings enabled

0.1 - Initial release 22-may-2016
- 1.21 VZW base
- button light notification