SetCPU 2.0.3
SetCPU is a CPU speed tweaking application for Android. More specifically, it allows control of certain aspects of the Linux cpufreq driver, allowing for overclocking, underclocking, or tweaking speeds and settings on many Android devices. It will work with most if not all rooted Android 1.5/1.6/2.0/2.1 builds on supported devices.
The program is free here for XDA members. It costs 1.99 on the Android Market. To install the APK I posted here, use ADB (in the Android SDK), Astro, or another application that can install APKs.
QR code (donate by buying it on the market ):
Warning: Very low or higher than normal frequencies may freeze your phone. Especially high frequencies (such as those enabled in certain custom kernels) have a risk of shortening the life of your phone. If your phone freezes, just yank out the battery.
Please buy it on the Market to donate if you like it.
Documentation and more information can be found here: http://www.pokedev.com/setcpu/
.
2.0.3 - Added a "safe mode" function that prevents SetCPU from running any tasks during boot if a file called "setcpu_safemode" exists in /sdcard or /data/local. This is useful if unstable settings were saved with "set on boot" checked.
- Reverted changes originally made to compensate for the old Superuser Permissions startup bug. SetCPU should perform startup tasks expediently again.
- Perflock disabler has been tested to be stable on supported kernels. The perflock disabler menu now has a "set on boot" function. Always disable this when switching to a new kernel or ROM. If you forget to do this and you get crashes, you can use the safe mode function above to disable it.
- Fixed crash issues with read-only (no root) mode, and disabled perflock disabler in read-only mode.
- Fixed a crash related to the widget service.
Lien
Source
Aussi disponible dans la Sinon, uploadez le !
SetCPU is a CPU speed tweaking application for Android. More specifically, it allows control of certain aspects of the Linux cpufreq driver, allowing for overclocking, underclocking, or tweaking speeds and settings on many Android devices. It will work with most if not all rooted Android 1.5/1.6/2.0/2.1 builds on supported devices.
The program is free here for XDA members. It costs 1.99 on the Android Market. To install the APK I posted here, use ADB (in the Android SDK), Astro, or another application that can install APKs.
QR code (donate by buying it on the market ):
Warning: Very low or higher than normal frequencies may freeze your phone. Especially high frequencies (such as those enabled in certain custom kernels) have a risk of shortening the life of your phone. If your phone freezes, just yank out the battery.
Please buy it on the Market to donate if you like it.
Documentation and more information can be found here: http://www.pokedev.com/setcpu/
changelog :
1.4.0: Revamped the main interface quite a bit, and fixed a few minor bugs.
1.4.0a: fixed a bug where 122MHz was being called 128MHz.
1.4.1: * Using Eclair API. Will work on QVGA devices (Tattoo) and WVGA devices (Sholes)
* Major performance enhancements - setting frequencies should be much faster in every situation (in the main application, profiles, upon startup, etc.).
* Added a small home screen widget that shows the current maximum and minimum frequencies. Clicking this widget launches SetCPU.
* Frequency lists for Snapdragon devices, Samsung Galaxy, Motorola Cliq, and HTC Tattoo have been included, though support for these devices is experimental. The device can be selected on the introduction screen.
* Custom frequency lists are now supported. To enable custom frequencies, place a file called setcpu.txt on /sdcard/ or /system/sd/, sorting frequencies in kHz, separated by comma, from lowest to highest, then select the corresponding option on the introduction screen.
* There is no longer a "set" button - changing the seekbar positions will immediately set the frequency. As a result, all seekbars in the application will now snap back if the user attempts to place the maximum frequency below minimum.
* Instead of refusing to work at all, SetCPU will now operate in a read-only mode if root access is not detected.
1.4.2: Instead of choosing between performance (always max) and ondemand CPU governors, there is now a drop down list with all the available governors on the device. Thanks morfic! Added CPU scaling configurations for the OMAP3 processor of the Motorola Sholes/Droid/Milestone. This is strictly in beta. Custom frequency list now reads from /system/setcpu in addition to setcpu.txt on SD FAT or EXT.
1.4.3: Includes compatibility fixes for HDPI devices and UI enhancements. Frequency lists for the Samsung Moment (untested), the T-Mobile Pulse, and the Acer Liquid have been included. The application will no longer sometimes re-set CPU frequencies upon launch.
1.4.3a: Added more frequencies for the Nexus One.
1.4.3b: Fixed a widget issue on the Nexus One. Sorry for the rather rapid succession of updates the past few days!
1.4.3c: Adds support for 600MHz kernel patches on the Motorola Droid. On the Droid configuration. SetCPU will attempt to detect the existence of 600MHz and adjust the frequency list accordingly.
1.4.4: Adds an "autodetect" option that works on newer kernels (at the bottom of the device selection screen). This should enable the supercharged speeds in some of tasmanian_droid's newer kernels. Fixes a force close crash when selecting some frequency lists that were not compatible with the device (thanks Julian).
1.4.5: - Streamlined/refactored profiles code.
- Added "battery temperature" profile. SetCPU is now able to set a certain speed when the battery goes above a user-defined threshold. This would optimally be set to throttle the CPU lower at a high temperature. To ensure compatibility with your device, see if a valid temperature is displayed in the "System Info" menu. This profile does not take effect immediately and does not replace being cautious - it is not based on CPU core temperature, and must wait for a battery state change before reacting.
- Added an "About" button to the main screen with simple themes. Default color scheme is now "Dark"
- Adjusted the widget to display four digit speeds properly (thanks Berzerker).
- Various bugfixes and UI tweaks.
1.4.6: Fixed issues with the battery profile. Included a much better icon thanks to Josh Deere (dphase).
1.5.0: * CPU governors can now be defined in profiles.
* Included a notifications service for profiles - turn this on using the relevant checkbox in the profiles menu.
* Profiles now log which speed and governor is being set.
* Added "advanced" tweaking capability for conservative governor.
* The system info menu and profiles menu now show temperature in both Celsius and Fahrenheit, and the widget also now displays battery temperature in Celsius and Fahrenheit.
* Added a "long benchmark" option to the system info menu, which should be more consistent than the "short benchmark."
* Also added a simple stress test to the system info panel to test the stability of overclocks.
* Autodetect is now the default for devices that support it, and will be the first option in the menu if available.
* Improved I/O performance.
* Various bugfixes, especially in profiles.
1.5.0a: * Charging profile now no longer takes effect when the phone is at 100% battery and unplugged.
1.5.1: * Two more battery profiles added. Lower battery readings will always take priority (eg. under 80% will always take priority over under 100%).
* Governor will now refresh alongside the other readings. Added governor reading under current frequency reading.
* Added an auto-refresh checkbox to the main screen. If checked, SetCPU will periodically refresh the current frequency reading without the need for pressing the refresh button. This checkbox applies to the system info panel as well.
* Tweaked the widget, and attempted to fix the elusive bug where the widget did not update correctly sometimes.
1.5.1a: * Fixed widget being cut off in landscape mode.
* Fixed Fahrenheit temperature reading in profiles.
1.5.2: * Added optional failsafe notification warning system that plays a ringtone and flashes the LED red when the failsafe profile is active (thanks WootRoot!).
* Added "copy to clipboard" function for the System Info menu (press Menu).
* Added an optional "active" widget, which will refresh CPU speeds at an interval like the main interface.
* Added support for the OMAP3 temperature sensor for the Droid. If present, use of the OMAP3 temperature sensor can be enabled in the failsafe profile.
* If available, the OMAP3 temperature can also be read in the system info menu.
* CPU temperature settings will only appear if the sensor is present and support for the temperature sensor is enabled in the kernel! Right now, this is only for the Droid.
* The about menu now defaults to a "default" theme where SetCPU will not mess with any backgrounds defined in the XML layout.
* Fixed stress test failing when JIT is enabled.
1.5.2a: * Temperature sensor used in the widget for the Droid is now controlled by the failsafe setting. I will implement a proper appwidget configuration activity in a later update.
* Fixed an issue with the audible warning notification not being properly dismissed.
* Profiles optimizations.
1.5.3: * Memory/performance footprint decreased.
* Battery drain should be fixed on the Droid.
1.5.3a: * Active widget CPU usage optimized.
* Further profiles optimization for the Droid.
* Uncommon I/O force close fixed.
1.5.4: * Switched to the Android 2.2 SDK.
* Enabled external storage support (install location is automatic).
* Eliminated the distinction between the active and passive widgets, and replaced it with an appwidget configuration activity for the widget, allowing the user to choose the color of the max/min text, temperature display, temperature sensor (Droid), and refresh interval.
* Optimized the active widget refreshing.
* SetCPU will now hide non-autodetect frequencies by default on devices where autodetect is available, but hard coded frequencies and the custom option can be re-enabled with a button.
* Custom frequency list can now read from this exact file: /data/local/setcpu (in addition to the previous setcpu.txt on SD fat or ext).
* Includes various bug fixes and minor UI changes.
1.6.0: * Ported parts of the app to the NDK to improve performance.
* Fixed a bug where the widget was resetting colors upon reboot or launcher orientation change.
* Autodetect now works for all devices. It is recommended by default.
2.0.0: * User interface has been completely redesigned, and now uses tabs for switching between menus instead of buttons. Landscape mode in the main tab no longer requires scrolling down. The Advanced menu and Profiles menu have also been redesigned for a better landscape experience.
* The "auto-refresh" option and refresh button in the main interface and system info menu have been retired - SetCPU always auto-refreshes automatically.
* The profiles menu and service have been recoded from scratch, and now allows the creation of unlimited profiles with custom priorities. The "priority" meter for each profile determines the order in which it is evaluated - if two profiles apply to a given situation, the profile with the higher priority will be set. If you had profiles set before 2.0.0, you will need to set them again.
* Profiles have been further optimized for performance footprint as a result of the re-structure.
* Added "Charging AC/Full" and "Charging USB/Full" profile conditions to distinguish between fast charging and slow charging modes on some devices (thanks Julian).
* Added a beta "perflock disabler" feature that will enable frequency changing on stock HTC 2.6.29 kernels. Access the perflock disabler this by pressing Menu in the main interface. If this gives you an error, does not work, or crashes your phone, your kernel is not compatible - pull your battery to reset if necessary. E-mail me with your ROM, phone model and kernel information in "System Info" (thanks to Richard for a lot of help with the low-level stuff, and no thanks to HTC for implementing perflock in such a way . To access the perflock disabler, press Menu in SetCPU's main interface.
* Code cleanup and more.
* A big thanks to everyone who tested, especially those who gave feedback on this one, all the people who purchased SetCPU from the Android Market, as well as all my users.
2.0.0a: * Fixed a permissions error that was causing SetCPU to autodetect incorrectly and force close on some ROMs.
2.0.0b: * More fixes, sorry guys.
* Fixed an issue with profiles and custom frequency lists.
* Clarified the profiles priorities introduction.
* Fixed a bug with the Advanced menu erroneously reporting values if the governor was changed after onResume was called, and fixed a crash that sometimes occurred as a result.
* Fixed a bug where the passive widget acted like the active widget after frequencies were manually set.
2.0.0c: * Fixed issues with the Advanced menu and Advanced settings not being
applied on boot.
* Fixed an issue in where temperature warnings were not being dismissed
properly.
* SetCPU 2.0.0 no longer force closes on Android 1.5 devices, but the UI in
some menus is flawed. I recommend that you update to a more recent version of
Android if possible.
2.0.1: * Added a few widget backgrounds. Configure this when adding the widget.
* Added the ability to "swipe" to the next tab.
* Fixed various bugs.
* New documentation is up.
2.0.2: ** End of life for Android 1.5 support.
- Perflock disabler support for HTC-kernel 2.6.32.15.
- New native benchmark button in the system info menu. The results of this benchmark is unaffected by VM optimizations like JIT, so it's ideal for speed comparisons across different devices.
- Added support for tweaking the "min sample time" of the interactive governor, if available.
- Fixed a bug where the scaling governor would not change when the profile switched and SetCPU's main tab was visible.
- Fixed an ANR bug in the "set on boot" function which sometimes caused the Advanced settings to not apply.
- Fixed an issue where SetCPU sometimes did not start on boot when used with Superuser Permissions 2.2.x.
- Fixed a force close issue that occurred when SetCPU could not autodetect frequencies due to permissions errors in the ROM
1.4.0a: fixed a bug where 122MHz was being called 128MHz.
1.4.1: * Using Eclair API. Will work on QVGA devices (Tattoo) and WVGA devices (Sholes)
* Major performance enhancements - setting frequencies should be much faster in every situation (in the main application, profiles, upon startup, etc.).
* Added a small home screen widget that shows the current maximum and minimum frequencies. Clicking this widget launches SetCPU.
* Frequency lists for Snapdragon devices, Samsung Galaxy, Motorola Cliq, and HTC Tattoo have been included, though support for these devices is experimental. The device can be selected on the introduction screen.
* Custom frequency lists are now supported. To enable custom frequencies, place a file called setcpu.txt on /sdcard/ or /system/sd/, sorting frequencies in kHz, separated by comma, from lowest to highest, then select the corresponding option on the introduction screen.
* There is no longer a "set" button - changing the seekbar positions will immediately set the frequency. As a result, all seekbars in the application will now snap back if the user attempts to place the maximum frequency below minimum.
* Instead of refusing to work at all, SetCPU will now operate in a read-only mode if root access is not detected.
1.4.2: Instead of choosing between performance (always max) and ondemand CPU governors, there is now a drop down list with all the available governors on the device. Thanks morfic! Added CPU scaling configurations for the OMAP3 processor of the Motorola Sholes/Droid/Milestone. This is strictly in beta. Custom frequency list now reads from /system/setcpu in addition to setcpu.txt on SD FAT or EXT.
1.4.3: Includes compatibility fixes for HDPI devices and UI enhancements. Frequency lists for the Samsung Moment (untested), the T-Mobile Pulse, and the Acer Liquid have been included. The application will no longer sometimes re-set CPU frequencies upon launch.
1.4.3a: Added more frequencies for the Nexus One.
1.4.3b: Fixed a widget issue on the Nexus One. Sorry for the rather rapid succession of updates the past few days!
1.4.3c: Adds support for 600MHz kernel patches on the Motorola Droid. On the Droid configuration. SetCPU will attempt to detect the existence of 600MHz and adjust the frequency list accordingly.
1.4.4: Adds an "autodetect" option that works on newer kernels (at the bottom of the device selection screen). This should enable the supercharged speeds in some of tasmanian_droid's newer kernels. Fixes a force close crash when selecting some frequency lists that were not compatible with the device (thanks Julian).
1.4.5: - Streamlined/refactored profiles code.
- Added "battery temperature" profile. SetCPU is now able to set a certain speed when the battery goes above a user-defined threshold. This would optimally be set to throttle the CPU lower at a high temperature. To ensure compatibility with your device, see if a valid temperature is displayed in the "System Info" menu. This profile does not take effect immediately and does not replace being cautious - it is not based on CPU core temperature, and must wait for a battery state change before reacting.
- Added an "About" button to the main screen with simple themes. Default color scheme is now "Dark"
- Adjusted the widget to display four digit speeds properly (thanks Berzerker).
- Various bugfixes and UI tweaks.
1.4.6: Fixed issues with the battery profile. Included a much better icon thanks to Josh Deere (dphase).
1.5.0: * CPU governors can now be defined in profiles.
* Included a notifications service for profiles - turn this on using the relevant checkbox in the profiles menu.
* Profiles now log which speed and governor is being set.
* Added "advanced" tweaking capability for conservative governor.
* The system info menu and profiles menu now show temperature in both Celsius and Fahrenheit, and the widget also now displays battery temperature in Celsius and Fahrenheit.
* Added a "long benchmark" option to the system info menu, which should be more consistent than the "short benchmark."
* Also added a simple stress test to the system info panel to test the stability of overclocks.
* Autodetect is now the default for devices that support it, and will be the first option in the menu if available.
* Improved I/O performance.
* Various bugfixes, especially in profiles.
1.5.0a: * Charging profile now no longer takes effect when the phone is at 100% battery and unplugged.
1.5.1: * Two more battery profiles added. Lower battery readings will always take priority (eg. under 80% will always take priority over under 100%).
* Governor will now refresh alongside the other readings. Added governor reading under current frequency reading.
* Added an auto-refresh checkbox to the main screen. If checked, SetCPU will periodically refresh the current frequency reading without the need for pressing the refresh button. This checkbox applies to the system info panel as well.
* Tweaked the widget, and attempted to fix the elusive bug where the widget did not update correctly sometimes.
1.5.1a: * Fixed widget being cut off in landscape mode.
* Fixed Fahrenheit temperature reading in profiles.
1.5.2: * Added optional failsafe notification warning system that plays a ringtone and flashes the LED red when the failsafe profile is active (thanks WootRoot!).
* Added "copy to clipboard" function for the System Info menu (press Menu).
* Added an optional "active" widget, which will refresh CPU speeds at an interval like the main interface.
* Added support for the OMAP3 temperature sensor for the Droid. If present, use of the OMAP3 temperature sensor can be enabled in the failsafe profile.
* If available, the OMAP3 temperature can also be read in the system info menu.
* CPU temperature settings will only appear if the sensor is present and support for the temperature sensor is enabled in the kernel! Right now, this is only for the Droid.
* The about menu now defaults to a "default" theme where SetCPU will not mess with any backgrounds defined in the XML layout.
* Fixed stress test failing when JIT is enabled.
1.5.2a: * Temperature sensor used in the widget for the Droid is now controlled by the failsafe setting. I will implement a proper appwidget configuration activity in a later update.
* Fixed an issue with the audible warning notification not being properly dismissed.
* Profiles optimizations.
1.5.3: * Memory/performance footprint decreased.
* Battery drain should be fixed on the Droid.
1.5.3a: * Active widget CPU usage optimized.
* Further profiles optimization for the Droid.
* Uncommon I/O force close fixed.
1.5.4: * Switched to the Android 2.2 SDK.
* Enabled external storage support (install location is automatic).
* Eliminated the distinction between the active and passive widgets, and replaced it with an appwidget configuration activity for the widget, allowing the user to choose the color of the max/min text, temperature display, temperature sensor (Droid), and refresh interval.
* Optimized the active widget refreshing.
* SetCPU will now hide non-autodetect frequencies by default on devices where autodetect is available, but hard coded frequencies and the custom option can be re-enabled with a button.
* Custom frequency list can now read from this exact file: /data/local/setcpu (in addition to the previous setcpu.txt on SD fat or ext).
* Includes various bug fixes and minor UI changes.
1.6.0: * Ported parts of the app to the NDK to improve performance.
* Fixed a bug where the widget was resetting colors upon reboot or launcher orientation change.
* Autodetect now works for all devices. It is recommended by default.
2.0.0: * User interface has been completely redesigned, and now uses tabs for switching between menus instead of buttons. Landscape mode in the main tab no longer requires scrolling down. The Advanced menu and Profiles menu have also been redesigned for a better landscape experience.
* The "auto-refresh" option and refresh button in the main interface and system info menu have been retired - SetCPU always auto-refreshes automatically.
* The profiles menu and service have been recoded from scratch, and now allows the creation of unlimited profiles with custom priorities. The "priority" meter for each profile determines the order in which it is evaluated - if two profiles apply to a given situation, the profile with the higher priority will be set. If you had profiles set before 2.0.0, you will need to set them again.
* Profiles have been further optimized for performance footprint as a result of the re-structure.
* Added "Charging AC/Full" and "Charging USB/Full" profile conditions to distinguish between fast charging and slow charging modes on some devices (thanks Julian).
* Added a beta "perflock disabler" feature that will enable frequency changing on stock HTC 2.6.29 kernels. Access the perflock disabler this by pressing Menu in the main interface. If this gives you an error, does not work, or crashes your phone, your kernel is not compatible - pull your battery to reset if necessary. E-mail me with your ROM, phone model and kernel information in "System Info" (thanks to Richard for a lot of help with the low-level stuff, and no thanks to HTC for implementing perflock in such a way . To access the perflock disabler, press Menu in SetCPU's main interface.
* Code cleanup and more.
* A big thanks to everyone who tested, especially those who gave feedback on this one, all the people who purchased SetCPU from the Android Market, as well as all my users.
2.0.0a: * Fixed a permissions error that was causing SetCPU to autodetect incorrectly and force close on some ROMs.
2.0.0b: * More fixes, sorry guys.
* Fixed an issue with profiles and custom frequency lists.
* Clarified the profiles priorities introduction.
* Fixed a bug with the Advanced menu erroneously reporting values if the governor was changed after onResume was called, and fixed a crash that sometimes occurred as a result.
* Fixed a bug where the passive widget acted like the active widget after frequencies were manually set.
2.0.0c: * Fixed issues with the Advanced menu and Advanced settings not being
applied on boot.
* Fixed an issue in where temperature warnings were not being dismissed
properly.
* SetCPU 2.0.0 no longer force closes on Android 1.5 devices, but the UI in
some menus is flawed. I recommend that you update to a more recent version of
Android if possible.
2.0.1: * Added a few widget backgrounds. Configure this when adding the widget.
* Added the ability to "swipe" to the next tab.
* Fixed various bugs.
* New documentation is up.
2.0.2: ** End of life for Android 1.5 support.
- Perflock disabler support for HTC-kernel 2.6.32.15.
- New native benchmark button in the system info menu. The results of this benchmark is unaffected by VM optimizations like JIT, so it's ideal for speed comparisons across different devices.
- Added support for tweaking the "min sample time" of the interactive governor, if available.
- Fixed a bug where the scaling governor would not change when the profile switched and SetCPU's main tab was visible.
- Fixed an ANR bug in the "set on boot" function which sometimes caused the Advanced settings to not apply.
- Fixed an issue where SetCPU sometimes did not start on boot when used with Superuser Permissions 2.2.x.
- Fixed a force close issue that occurred when SetCPU could not autodetect frequencies due to permissions errors in the ROM
2.0.3 - Added a "safe mode" function that prevents SetCPU from running any tasks during boot if a file called "setcpu_safemode" exists in /sdcard or /data/local. This is useful if unstable settings were saved with "set on boot" checked.
- Reverted changes originally made to compensate for the old Superuser Permissions startup bug. SetCPU should perform startup tasks expediently again.
- Perflock disabler has been tested to be stable on supported kernels. The perflock disabler menu now has a "set on boot" function. Always disable this when switching to a new kernel or ROM. If you forget to do this and you get crashes, you can use the safe mode function above to disable it.
- Fixed crash issues with read-only (no root) mode, and disabled perflock disabler in read-only mode.
- Fixed a crash related to the widget service.
Lien
Source
Aussi disponible dans la Sinon, uploadez le !
Dernière édition par Nico le Sam 29 Mai 2010 - 13:34, édité 2 fois