Modification du Kernel Compatible avec les Roms MoDaCo et patché pour supporter une vitesse de 1200 Mhz sans augmenter le voltage (de haute valeur demander de le faire par contre...).
Grosse mise à jour 5: Nouveau Kernel avec de grande capacité! Ce Kernel démarre avec ses valeurs initiales (1000 Mhz max et voltage par défaut). Vous pouvez alors être capable de monter les fréquences (1200, 1300 mhz) avec "Pimp My Cpu". Mais vous pouvez aussi baisser le voltage pour obtenir le meilleur de votre appreil. Lisez le post sur "Pimp My Cpu" pour comprendre comme cela fonctionne.
A essayer à vos risques et périls. Peut provoquer des dommages et des instabilités...
Discussion sur "Pimp my Cpu" en Anglais => Ici
Installation:
- Copier le zip sur la carte SD externe - Lancer ClockWorkMod (bouton Power volume bas) - Choisir "install zip from sdcard" - Sélectionnez le Zip
I did successfully add 216 Mhz frequency to the kernel, but there's a bad news. I did found a hardware limit on the max8907 controller : voltages cant be lower than 770mV. It's why the stock LG kernel runs at 300 Mhz for it's minimal frequency, it run fine at 770mV. So this means that any undervolting lower then 770mV wont do anything, it will still run at 770mV... Taking the previous discover in account, i didn't add the 216 Mhz state but replaced the (really) too hot 1300 Mhz state by a 1100 Mhz one, so you can probably use that without overvolting (unlike the 1200 Mhz state). I probably fixed the non booting problem on some roms by adding the required "init.d" script in the zip update package. 2x-kernel-2.6.32.9-fakeShmoo-cpasjuste.5.zip md5 : 514be18ced541f953cc15a1a0e995ea6 Be sure to REMOVE "boot settings" from "Pimp My Cpu" AND uninstall "Pimp My Cpu" before installing the kernel to reset default values.
12 Apr 2011 :
2x-kernel-2.6.32.9-fakeShmoo-cpasjuste.4.zip A few fix on the oc/uv code which could improve stability Now use an "unified" cpufreq sysfs devices name. I mean it use the same sysfs names than other oc/uv kernels (at least Galaxy i9000 ones). You HAVE to update "Pimp My Cpu" to version 2.1 at least for it to work. Cpu sensor is now "/sys/devices/system/cpu/cpu0/cpufreq/cpu_temp" Freq/voltage table is now "/sys/devices/system/cpu/cpu0/cpufreq/frequency_voltage_table" like other kernels. See this post for more informations. Uv/mV table is now "/sys/devices/system/cpu/cpu0/cpufreq/UV_mV_table". See this post for more information. Need Pimp My Cpu version 2.1 at least.
11 Apr 2011 :
2x-kernel-2.6.32.9-fakeShmoo-cpasjuste.3.zip Back to "normal" releases (with more frequency steps added) Lower 1200/1300 Mhz voltages, as nvidia recommand 100mV max voltage change between two steps. May not be stable for all. Maybe fixed some bugs added by the OC/UV modification (some references to old freq/voltage table was still around) Probably last kernel from me, dev's now have the necessary resources on my github to play around Be sure to REMOVE "boot settings" from "Pimp My Cpu" AND uninstall "Pimp My Cpu" before installing the kernel to reset default values.
10 Apr 2011 :
2x-kernel-2.6.32.9-fakeShmoo-cpasjuste.2.zip Test release, try to be as close as possible to the default LG kernel Now based on new kernel sources released by LG instead paul sources Only 6 available frequency like LG stock kernel (could prevent some problems) Maybe fixed some bugs added by the OC/UV modification (some references to old freq/voltage table was still around) Be sure to REMOVE "boot settings" from "Pimp My Cpu" AND uninstall "Pimp My Cpu" before installing the kernel to reset default values.
9 Apr 2011 :
2x-kernel-2.6.32.9-fakeShmoo-cpasjuste.1.zip Added cpu sensor ( "/sys/devices/system/cpu/cpu0/cpufreq/FakeShmoo_cpu_temp" ) Added freq/voltage table ( "/sys/devices/system/cpu/cpu0/cpufreq/FakeShmoo_freq_voltage_table" ), see this post for more information. Added uv/mv table ( "/sys/devices/system/cpu/cpu0/cpufreq/FakeShmoo_UV_mV_table" ), see this post for more information. Changed unstable 1400Mhz frequency to 1300Mhz (we can't have more than 8 freqency) Added "init.d" support to be 100% compatible with "Pimp My Cpu" Be sure read the "Pimp My Cpu" changes which may interest you
Merci du partage cependant je préfère l'ancienne version ou on a pas besoin de l'OC avec pimp my cpu,je fais de meilleurs résultats,environ 3700 sous quadrant a 1.2 ghz
Avec celui ci,je ne dépasse pas les 3000
je corrige ton titre,ce n'est pas une rom mais un kernel !
Maj. post1. Pour résoudre les problèmes rencontrés avec le Kernel de Paul pour certains, une nouvelle version cette fois ci basé sur le dernier Kernel de LG + stable.
15 Apr 2011 : 2x-kernel-2.6.32.9-fakeShmoo-psyc cpasjuste.5.zip Same as "2x-kernel-2.6.32.9-fakeShmoo-cpasjuste.5" but with higher overclocking (no recommended), see below. MD5 : 168a51f4d26f272a29607824b60777